Kyocera ECOSYS P6035cdn Kyocera Command Center RX User Guide Rev-2014.2
Kyocera ECOSYS P6035cdn Manual
View all Kyocera ECOSYS P6035cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera ECOSYS P6035cdn manual content summary:
- Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 1
Command Center RX USER GUIDE - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 2
operations given in this guide support the Windows 7 printing environment. Essentially the same operations are used for Microsoft Windows Vista, Windows XP, Windows Server 2003, Windows Server 2008, and Windows Server 2012 environments. We cannot be held liable for any problems arising from the use - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 3
1 Accessing the Embedded Server 1 2 The Embedded Server Home Page 2 Login...2 Top Bar 3 Navigation Menu 4 Device Status 6 3 About Login 7 Levels of Login 7 4 Document Box 9 Custom box 9 FAX Box 12 Sub Address /Timer 23 Date/Time 25 System 26 7 Function Settings 28 Common/Job Default 28 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 4
IP 53 Protocol 60 9 Security Settings 64 Device Security 64 Network Security 68 Certificates 70 10 Management Settings 72 Job Accounting 72 Authentication 74 ID Card 77 Notification/Report 78 History Settings 80 SNMP 83 System stamp 84 Message Board 86 Reset 87 11 Troubleshooting 89 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 5
's home page will be accessed and displayed. For initial login, use the predefined "Admin" as the Use Name, and "Admin" as the Password to access all the pages. For initial login, use the predefined Admin as the Use Name, and Admin as the Password to access all the pages. This is set up internally - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 6
To fully access the features of the embedded server pages, enter the User Name and Password and click Login. Entering the predefined administrator password allows the user to access all pages, including Document Box, Address Book, and Device Settings on the navigation menu. 2 Embedded Web Server - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 7
choosing one of network authentication, local authentication, and job accounting authentication methods. For details, see 3 About Login Levels of Login on page. display, some characters may be garbled. Auto-refresh To continuously update the embedded server's pages to the most recent status, select - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 8
Defaults (basic, ID information, and capability) as well as optional equipment installed, firmware, network parameters, and FAX parameters. Counter This page includes the printed pages and scanned jobs currently scheduled for transmission. Click Refresh to update the list. Click Cancel Job to remove - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 9
Board, and Reset are included. For more information, see Management Settings on page 72. Links Links to our websites. Visit the following website for more information and downloads. Download Drivers and Software For downloading printer drivers and software: KYOCERA Document Solutions - Download http - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 10
and configuring their settings. Network options When the optional network interface kit (IB-50 or IB- Displays Shows the operating status of the printer, scanner, and/or FAX. Operation Panel Usage Shows by paper source. Toner Shows the toner supply by color. The status of the waste toner box is also - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 11
network authentication, User Login must be turned on. The default user name and password, or the local administrator account when User Login is turned off, is Admin Settings, Network Settings, Security Windows domain network. Enter a User Name and Password and select the domain you want to login - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 12
her job account ID. Enter the job account ID in Account Login and click Login. Note: If a user is registered as an Administrator on the Local User List, click Admin Login. Enter a User Name and Password and click the Login button. For access using a job account ID, My Information, Device Information - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 13
are available only if the device is equipped with a FAX kit. The users with a general user account can delete the documents number in the Box # window and click Go to, or enter the box name in the Box Name window and click the magnifying download, E-mail or print documents in the custom box. User - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 14
the password. The documents contained in the Custom Box are displayed with its name, date of creation, size, etc. You can choose List View or Thumbnail to view the box contents. Alternatively, you can open the list of the user boxes, directly enter the box number in the Box # window and click - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 15
Use the Color Selection drop-down list if you want to change the color of the document after downloading. For example, you can download a color document as a monochrome document when it is stored in a PC. 4. Use the Additional Information. These entries are appended in the file name. User Guide 11 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 16
is printed. 7. In Functions, change settings for Duplex, Combine, EcoPrint, and Toner Save Level as desired. 8. Click Print button. The document is printed. at a time. 4. You can enter the box name in the Box Name window and click the magnifying glass icon to quickly search the custom box. 5. Click - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 17
-protected, enter the password. The documents contained in the FAX Box are displayed with its name, date of creation, size, etc. You can choose List View or Thumbnail to view the box contents. Alternatively, you can directly enter the box number in the Box # window and click Go to, or enter the - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 18
-protected, enter the password. The documents contained in the Sub Address Box are displayed with its name, date of creation, etc. Alternatively, you can directly enter the box number in the Box # window and click Go to, or enter the box name in the Box Name window and click the magnifying icon - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 19
in the Box Name window and click the magnifying glass icon to quickly search the box. 4. Click Delete icon once. If required, enter the password and click OK. Polling . 3. To configure the box so that documents are overwritten at updating, set Overwrite Setting to On. To configure the box so that - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 20
Document Box 3. Click Print button. The Basic submenu will open. 4. You can immediately start to print the documents in the order shown in Selected Files by clicking Print. If you want to change the order of printing, highlight a document and press Top, Up, etc. If you want to omit a document from - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 21
the contact including a shared folder accessible from Microsoft Windows Network. Specify Host Name, Port Number, Path to the shared folder, Login User Name, and Login Password for the contact. When the Test button is 's Number or Name you want to edit. The Property page appears. User Guide 17 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 22
. The Property page of the group opens. Alternatively, you can directly enter the address number in the Address # window and click Go to, or enter the address name in the Address Name window and click the magnifying icon, to quickly search the group. 3. Modify the group's Number and Name as desired - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 23
radio button to the left. You can check only one contact to assign at a time. You can enter the address name in the Address Name window and click the magnifying glass icon to quickly search the contact. User - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 24
key 1. Click One Touch Key under Address Book on the navigation menu. One Touch Key List opens. 2. Enter the key number in the Key # windows and click Go to. The Property page appears. 3. Make entries required to modify the Display Name and the Destination. 4. After confirming the settings, click - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 25
is accessible when you have logged in the embedded server with administrator privilege, while network authentication or local authentication is enabled. If prompted, configure the following settings. See Settings on the navigation menu. The Paper/ Feed/Output Settings page opens. User Guide 21 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 26
feed the cover. Paper Size for Small Original You can select Default Paper Size or the paper size by clicking the drop-down list when an original of a small size, such as a card, which the scanner cannot detect is printed. Offset One Page Documents You can select whether offset stacking - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 27
1. Click Energy Saver/Timer under Device Settings on the navigation menu. The Energy Saver/Timer Settings page opens. 2. You can configure the following settings. User Guide 23 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 28
the print data received by the network interface always to wake the machine to continue printing, click Off next to Network. Auto Sleep Click Settings button settings: Auto Panel Reset Configures the panel to be automatically reset. Activate this setting to open Panel Reset Timer and specify the - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 29
range is 5 to 495 seconds. WSD scan timer This determines the time period before the machine reverts to normal mode, after WSD scan mode has been engaged. The range is 10 to 495 seconds (in 5-second increments). Weekly IP address of the time server and click the Synchronize button. User Guide 25 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 30
If the settings for the item marked with an asterisk (*) has been changed, you must restart the machine or the network. To restart the machine, proceed to the Reset page. Device Information 1. Click System under Device Settings on the navigation menu. The System Settings page opens. 2. Make changes - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 31
settings if needed. Action when color toner is empty Select the action when color toner is empty, whether you want to cancel toner that you can specify from 5 to 100. Default Paper Source Displays this item when a large capacity feeder is installed and selected as a default paper source from Default - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 32
embedded server with administrator privilege, while network authentication or local authentication is enabled. If needed, make the following settings: See below for detailed information. • Common/Job Default • Copy • Printer • E-mail • Sending Job - Folder • DSM Scan • FAX/i-FAX • Send and Forward - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 33
document to scan. You can manually select Black & White to forcedly switch color mode. Scan Resolution Specifies the resolution for scanning. The from the drop-down list when it is downloaded. Original image (Send/Store) The original quality for scanning or storing must be selected according to the - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 34
deactivates Continuous Scan for fax. Off to control toner consumption for saving the printing costs. The default setting is Off. When selecting On, you can select Toner Save Level from of Email. Up to three templates can be created and configured with the default settings. 30 Embedded Web Server - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 35
is not displayed when an optional Data Security Kit is activated or a Repeat Copy job is cleared. Skip Blank Page You can choose whether blank pages should be delivered or not. 3. Click Submit button. File Default Settings 1. Click Common/Job Defaults under Function Settings on the navigation menu - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 36
OCR Text Recognition You can convert the scanned document to the text data when you be configured when an optional OCR Expansion kit is installed. Color TIFF Compression This allows downloaded. 3. Click Submit button. Function Default The default settings can be changed in Common/Job Defaults - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 37
the machine or the network. To restart the machine, proceed to the Reset page. General 1. Click can be displayed when an optional Emulation kit is installed. Paper Feed Mode Determines in the absence of data during this time period. The default setting is 30 seconds. Job Name Select the job Guide 33 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 38
Settings page opens. 2. Click Settings button. The AirPrint Settings page opens. You can make changes for the following items as required. AirPrint The default setting is On. Bonjour Name Enter the Bonjour name. Location Enter the location of the machine on Location of the System Settings page under - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 39
Mode to On or Off. The default setting is Off. This is only available for some color machines which support Gloss Mode. Color Selection Sets Color Off to control toner consumption for saving the printing costs. The default setting is Off. When selecting On, you can select Toner Save Level Guide 35 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 40
DNS server address may be entered on the TCP/IP Settings page. SMTP Port Number Set the SMTP Port Number or use the SMTP default port 25. The default port number for SMTP connections over SSL is 465. SMTP Server Timeout Sets the timeout in seconds during which this device tries to - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 41
60 minutes. The default is 15 minutes. Login Password is sent using plain ASCII text. When Use APOP is On, the Login Password is encrypted, therefore cannot be read. APOP requires that the POP3 server supports SMTP ports. 10.Connection Test: This the body of an Email are printed. When no Guide 37 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 42
this machine. Signature Displays the signature to be inserted in the end of the E-mail body. Function Default The default settings can be changed in Common/Job Default Settings page. 3. Click Submit button. Scan to Folder This section includes advanced settings for copying. FTP Settings 1. Click - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 43
Default Settings page. DSM Scan DSM (Distributed Scan Management) is a Microsoft definition of scanner management systems over the Windows networks. The administrator can use the Windows Server 2008 R2 scan . DSM Scan Client Certificate Scan under Function Settings on the navigation menu. The DSM Scan - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 44
Submit button. Certificate Status 1. Click DSM Scan under Function Settings on the navigation menu. The DSM Scan Settings page opens. 2. The status been changed, you must restart the machine or the network. To restart the machine, proceed to the Reset page. Common Settings 1. Click FAX/i-FAX under - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 45
Selects the FAX reception mode. The choices are Auto (Normal, FAX/Tel, TAD or DRD) or Manual. (The selectable option is different depending on the destination.) 2. Number of Rings (Normal): Specifies the 6. You can configure settings for Remote Settings. Make the following settings: User Guide 41 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 46
DNS server address may be entered on the TCP/IP Settings page. 2. SMTP Port Number: Set the SMTP Port Number or use the SMTP default port 25. The default port number for SMTP connections over SSL is 465. 3. SMTP Server Timeout: Sets the timeout in seconds during which this device tries to - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 47
Login Password is sent using plain ASCII text. When Use APOP is On, the Login Password is encrypted, therefore cannot be read. APOP requires that the POP3 server supports the attached files and the body of an Email are printed. When no attached files exist, default port number is 25. User Guide 43 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 48
Send Settings on the E-mail Settings page. 4. Function Default: The default settings can be changed in Common/Job Default Settings page. 8. Click Submit button. Send and and a name of the address on the address page. E-mail Email forwards the E-mail to the E-mail address entered. Click E-mail - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 49
Host Name, Port Number, path to a folder, Login User Name, and the Login Password. You can confirm that the E-mail is properly forwarded scan. You can manually select Full Color, Grayscale, or Black & White to forcedly switch color mode. Scan Resolution Specifies the resolution for scanning Guide 45 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 50
File Separation Scans a multi Network Security Settings page is used. 3. Click Submit button. RX/Forward Rules Conditional reception/forwarding is a function for automatically forwarding documents received by FAX or i-FAX to other FAX machines, sending them as attachments to Email not support RX/ - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 51
User Guide Function Settings General Configure the general information on the rule. 1. from 1 to 65535. Path: Enter the path of the folder. Login User Name: Enter the login user name. Login Password: Enter the login password. Connection Test: ClickTest button to confirm the connection to the folder - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 52
password. Select Printing Allowed or Changes Allowed from the drop-down list. Select Enable to permit to copying of text or images on Copying of Text/Images/Others. 9. PDF/A: You can configure the setting If PDF Encryption is Disable. Select Off, PDF/A-1a, or PDF/A-1b from the drop-down list. 10 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 53
You can activate or deactivate the Send key on the machine. FAX Function You can activate or deactivate the Fax key on the machine. User Guide 49 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 54
8 on the drop-down list. 3. Click Submit button. Quick Setup Registration 1. Click Operation Panel under Function Settings on the navigation menu. opens. 2. This section includes the following items for configuration. By default, each function is assigned with its standard items. Copy Each of - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 55
Function Settings Send Document in Box Each of Key 1 to Key 6 is assigned with one of the Send Document in Box functions. Select an item from the drop-down list. 3. Click Submit button. User Guide 51 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 56
Select Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full and 1000BASE-T from the LAN Interface drop-down list depending on your network environment. 4. The current status is shown in Client Certificate. To make advanced settings, click Settings button. Select the appropriate certificate on - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 57
Network the network. To restart the machine, proceed to the Reset page. 1. Click TCP/IP under Network Settings . IPv4 settings 1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP be entered in this field as part of the system network settings. When DHCP/BOOTP is set to On, a - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 58
Network Settings Subnet Mask Specifies the subnet mask. When DHCP/BOOTP is turned On, a dynamic IPv4 address is assigned to the device, and the field is grayed out. Default Gateway Specifies the IP address of the default primary and secondary WINS (Windows Internet Name Service) servers. When DHCP/ - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 59
network that the device is connected to. Default Gateway Specifies the IPv6 address of the default router in the network that the device is /IP under Network Settings on the Specify the IP addresses or network addresses of the hosts to . 1. Click TCP/IP under Network Settings on the navigation menu. - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 60
no entries, access is allowed to all. To allow access to a network, enter the network IPv4 address, and the subnet mask. An example of the data format based on the IP addresses and protocols. Specify the IP addresses or network addresses of the hosts to which access is granted. If nothing is - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 61
(NetBEUI) and RAW. If no port is specified for printing, the default port used will be Logical Printer 1 (LP1), port 9100. 1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings page opens. 2. to transmit a control code after the print data is sent. User Guide 57 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 62
default policy for non-IPSec packets. Select Allow to allow communication with all hosts and networks Rule 1 through Rule 10 are displayed. To activate rule from IKEv1, IKEv2, and Manual. Encapsulation Mode: Transport encapsulates an protocol supported. Tunnel uses a gateway provided in the network. - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 63
User Guide Network Settings Subnet Mask: When IPv4 is selected for IP Version, this specifies the subnet mask of the hosts or network with which selected for IP Version, this specifies the prefix length of the hosts or network with which the print system is connecting via IPSec. If this field is - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 64
execute, select On. 6. Manual: If Key Management Type is set to Manual, configure: Protocol, Hash the network. To restart the machine, proceed to the Reset page. 1. Click Protocol under Network Settings , the printing system is created in Windows Network Neighborhood. NetBEUI is an enhanced version of - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 65
WSD is a new networking protocol provided with Windows Vista for discovery of the printing systems and data exchange for printing. To enable the WSD protocol, turn this item On. 6. DSM Scan: DSM allows the distributed scan management. The system administrator can use DSM to manage scan services over - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 66
(DSM Scan) from Off, STARTTLS, or SSL/ TLS on the drop-down list. To enable this item, activate SSL on the Network Security WSD: Enhanced WSD is an API to simplify connections to web service enabled devices, such as Printers, Scanners and File Shares. To enable Enhanced WSD, turn this item On - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 67
Network from MSCHAPV2, MSCHAP, CHAP, and PAP on the drop-down list. Login User Name: Enter the name of the user to access the printing system. or PEAP(APMS-CHAPv2) has been selected for encryption. Enter the password. Common Name: This protocol is activated when EAP-TTLS, EAP-FAST User Guide 63 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 68
Settings on the navigation menu. The Device Security Settings page opens. 2. This section includes the following items for configuration. Network Access from the network interface cannot be restricted. Access should be restricted depending on the protocol. For more details, see the Protocol Settings - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 69
partial-use the following Partial lock 1 (-3). Partial lock 1 Settings related to input/output, such as network settings, system settings, document settings are prohibited. (e.g. the registration/edit of Address book and Document to see the jobs log of his/her own. Display Jobs Log User Guide 65 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 70
policy, set this to On and configure the following. 2. Number of Retries until Locked: Select the number of password retries until the account is locked, from the drop-down list (1 - 10 times). 3. Lockout Duration: Select the time period in minutes until the account is excluded, from the drop-down - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 71
when an optional Data Security kit is activated. Click Settings button to open the Password page. Enter the password and click OK button key is pressed to start scanning. Entry Check for New Dest. When enabled, this determines whether re-entry of a password for confirmation is required when adding - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 72
has been changed, you must restart the machine or the network. To restart the machine, proceed to the Reset page. Network Security Settings 1. Click Network Security under Security Settings on the navigation menu. The Network Security Settings page opens. 2. This section includes the following items - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 73
driver. 3. Click Submit button. Network Access Settings 1. Click Network Security under Security Settings on the navigation menu. The Network Network Settings. SNMPv1/v2c The SNMP Read and Write Community settings function as passwords , see SLL of the Network Security Settings page. IEEE802.1x - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 74
Network Settings. 3. Click Submit button. Certificates This page allows you to create, update network. To restart the machine, proceed to the Reset default. The automatically issued certificate has the country code, common name, and a validity period of about 10 , DSM Scan, IPsecRuleX, , Email Address - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 75
a protocol or a configuration. To configure the IPSec Rule Certificate, go to TCP/IP Settings page. To configure other Certificates, go to Protocols Settings page under Network Settings. User Guide 71 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 76
privilege, while network authentication or local authentication is enabled. If needed, make the following settings: See below for detailed information. • Job Accounting • Authentication • ID Card • Notification/Report • History Settings • SNMP • System Stamp • Message Board • Reset Job Accounting - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 77
the drop-down list, select Printed Pages by Function, Printed Pages by Paper Size, or Printed Pages by Layout as needed for assign a limit. User Guide 73 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 78
scanned pages of Copy, FAX, and Other Scan. FAX Counter Shows the total pages and times of sending faxes. Counter Reset Click Reset button to reset DNS server information. Port Number: Enter the port number of the network authentication server. Server Type: Select the server type from the drop-down - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 79
Default Domain: Click Domain List button to open the Domain List page. Enter the domain name and click Submit button. If you have entered the several domain names, you can select it from the drop-down list. 2. Configure the Network User Settings. Obtain Network (Full Color) User Guide 75 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 80
user list (up to 32 characters). Login User Name Enter the user ID to log in (up to 64 characters). You cannot duplicate a login user name to register. Password Enter the password to log in (up to 64 characters). Confirm Password To confirm the password, enter the same password that was entered in - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 81
this item appears. Select either Destination or Address Book from the dropdown list. Address Book Type In Default Screen (Send/FAX), click Address Book to open a drop-down list. Select either Machine Address . The ID Card Settings page opens. 2. Configure the Authentication Settings. User Guide 77 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 82
login, select Prohibit or Permit. Password Authentication Select On to use the password authentication. 3. Configure the ID Card Settings. Select IDM or FeliCa as the ID Card Read Type. 4. Configure the FeliCa Settings. System Code 1 Enter the System Code 1 from 0000 to FFFF. Service Fax kit is - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 83
Address Enter the e-mail address. 5. You can configure settings for Job Finish Notice. Attach Image Select either On or Off. 6. You can configure settings for Maintenance Report. Equipment ID Enter the equipment ID. Recipient E-mail Address Enter the E-mail address to receive the - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 84
, select a time from the Time drop-down list. For Hourly, select a time from the every Hour drop-down list. Run once now A maintenance report will be sent to a recipient once automatically when clicking Send. 7. Configure Event Reports/Schedule Reports 1 (to 3) as follows. Reports 1 (to 3) E-mail - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 85
You can configure settings for Login History Settings. Login History Select either On or the subject for the Login History. Auto Sending Determines whether the Login Histories for sending, from 1 to 1000. View History A Login History List will be shown when clicking View button. Run once now A Login - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 86
Management Settings 4. You can configure settings for Device Log History Settings. Device Log History Select either On or Off. Recipient E-mail Address The E-mail address of the recipient of logs. If there are more than one recipient, then the addresses should be separated by a semicolon (;). - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 87
changed, you must restart the machine or the network. To restart the machine, proceed to the Reset page. SNMP Settings 1. Click SNMP under Management Settings community name for SNMP requests to write (change) a value. The default name is 'public'. After you have changed the setting, you Guide 83 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 88
. Select either On or Off in the Protocol Settings page under Network Settings. To configure SNMP v3, proceed as follows. Authentication Sets . Read Only User Enter User Name and Password of the read-only user. Read/Write User Enter User Name and Password of the read/write user. 4. Click Submit - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 89
bates stamp. Fixed Digit Number: Select a number of digits to fix from the drop-down list. Numbering Default: Enter the initial value of the serial number. 3. Position Settings: Select the position for the stamp. Font size: From the drop-down list, select 14.0 pt, 12.0 pt, or 10.5 pt. User Guide 85 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 90
on the navigation menu. The System Stamp Settings page opens. 2. To change the stamp default settings, click Settings button in Default Settings. 1. Text Stamp: Add or delete the text stamp as follows. Text 1 (to 10): Enter the text for text stamp. To remove the text stamp, delete the text in - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 91
Settings on the navigation menu. The Reset page opens. 2. Restart the device or network as needed. Restart Device Clicking Restart Device button restarts the machine. Restart Network Clicking Restart Network button restarts the network interface card integrated in the machine. User Guide 87 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 92
Management Settings Reset device to factory default 1. Click Reset under Management Settings on the navigation menu. The Reset page opens. 2. Click Initialize button as needed. The machine is reset to the factory default. 88 Embedded Web Server - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 93
11 Troubleshooting Troubleshooting Consult the table below to find basic solutions for problems you may encounter with the embedded an "http://" URL. Reference Operation Guide Operation Guide - - - IP Filter (IPv4) on page 55 IP Filter (IPv6) on page 56 Network Security Settings on page 68 User - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 94
the Admin password. Contact your dealer or service center. Error or Warning is displayed under the STATUS indicator. Is there an error message shown in the display? Perform the troubleshooting procedure the messages suggests referring to the Operation Guide. Operation Guide 90 Embedded - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 95
Troubleshooting User Guide 91 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 96
Solutions Brazil, Ltda. Av.Tambore,1180 Mod.B-09 CEP 06460-000 Tambore-Barueri-SP, Brazil Phone: +55-11-4195-8496 Fax: +55-11-4195-6167 KYOCERA Document Solutions Australia Pty. Ltd. Level 3, 6-10 Talavera Road North Ryde N.S.W, 2113, Australia Phone: +61-2-9888-9999 Fax: +61-2-9888-9588 - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 97
16B 164 75 Kista, Sweden Phone: +46-8-546-550-00 Fax: +46-8-546-550-10 KYOCERA Document Solutions Norge Nuf Postboks 150 Oppsal, 0619 Oslo, Norway Phone: +47-22-62-73-00 Fax: +47-22-62-72-00 KYOCERA Document Solutions Danmark A/S Ejby Industrivej 60, DK-2600 Glostrup, Denmark Phone: +45-70223880 Fax - Kyocera ECOSYS P6035cdn | Kyocera Command Center RX User Guide Rev-2014.2 - Page 98
2014.2
Command Center RX
USER GUIDE