Kyocera ECOSYS P6035cdn Kyocera Command Center RX User Guide Rev-2014.2 - Page 78
Authentication, Settings
View all Kyocera ECOSYS P6035cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Management Settings Scanned Page Counts Shows the total scanned pages of Copy, FAX, and Other Scan. FAX Counter Shows the total pages and times of sending faxes. Counter Reset Click Reset button to reset the counters. 4. Click Other Account button or Total Account button to view the result accounting. Other Account The total number of copies accounted for other account is displayed. Total Account The total number of copies accounted for all account is displayed. Authentication This section includes advanced settings for authentication. Settings To enable authentication, you must first make the authentication settings. 1. Click Authentication under Management Settings on the navigation menu. The Settings page opens. 2. Click Settings button. The Authentication Settings page opens. This section includes the following items for configuration. General For Authentication, select one of Off, Local Authentication and Network Authentication from the drop-down list. Action Settings For processing unknown ID jobs, select either Permit or Reject. To configure this, go to the Job Accounting Settings page. 3. If you have selected Local Authentication in General in step 2 above, switch Local Authorization On or Off. If you have selected Network Authentication in General in step 2 above, configure the following settings. 1. Configure the Network Authentication Server. Host Name: Enter the host name of the network authentication server. If you use the host name, you must first specify the DNS server information. Port Number: Enter the port number of the network authentication server. Server Type: Select the server type from the drop-down list. When you use ID Card, select Ext.. 74 Embedded Web Server