Kyocera ECOSYS P6035cdn Kyocera Command Center RX User Guide Rev-2014.2 - Page 58
IPv6 Settings, Use DNS Server from DHCP
View all Kyocera ECOSYS P6035cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Network Settings Subnet Mask Specifies the subnet mask. When DHCP/BOOTP is turned On, a dynamic IPv4 address is assigned to the device, and the field is grayed out. Default Gateway Specifies the IP address of the default gateway. When DHCP/BOOTP is turned On, a dynamic IPv4 address is assigned to the device, and the field is grayed out. Domain Name Specifies the domain name of the domain to which the printing system belongs. It should not contain the host printer name, for example, "abcde.com". abcde.com. When DHCP/BOOTP is turned On, a dynamic IPv4 address is assigned to the device, and the field is grayed out. DNS Server (Primary, Secondary) Specifies the IP addresses of the primary and secondary DNS (Domain Name System) servers. When DHCP/BOOTP is turned On and Use DNS Server from DHCP is selected, you can select to use the DNS server obtained via DHCP. When DHCP/ BOOTP is turned On and Use following DNS Server is selected, you can enter static DNS server information in the Primary and Secondary fields provided. WINS Servers (Primary, Secondary) Specifies the IP addresses of the primary and secondary WINS (Windows Internet Name Service) servers. When DHCP/BOOTP is turned On and Use WINS Server from DHCP is selected, you can select to use the WINS server obtained via DHCP. When DHCP/BOOTP is turned On and Use following WINS Server is selected, you can enter static WINS server information in the Primary and Secondary fields provided. IPv6 Settings 1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings page opens. 2. This section includes the following items for configuration. IPv6 Specifies whether or not to enable the IPv6 protocol. Select On to use the IPv6 protocol. IP Address TA static IPv6 address can be entered in this field for the device as part of the system network settings. Assigns an IPv6 address to the printing system network component. The format of the IPv6 address is a sequence of numbers (128 bit in total) separated by colons, e.g. 2001:db8:3c4d:15::1a2c:1a1f. Prefix Length Specifies the IPv6 prefix length. It can be a decimal value between 0 and 128. RA(Stateless) 54 Embedded Web Server