Kyocera FS-C2026MFP 120V FS-C2026MFP/C2126MFP Operation Guide - Page 62
Network Setup (LAN Cable Connection)
View all Kyocera FS-C2026MFP 120V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Preparation before Use Network Setup (LAN Cable Connection) The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), TCP/IP (IPv6), IPX/SPX, NetBEUI, IPSec, and AppleTalk. It enables network printing on the Windows, Macintosh, UNIX, NetWare and other platforms. This section explains the TCP/IP (IPv4) Setup procedures. For other network settings, refer to Network Setup on page 8-149. • TCP/IP (IPv4) Setup (when an IP address is automatically assigned) ...2-16 • TCP/IP (IPv4) Setup (by Entering IP Addresses) ...2-16 TCP/IP (IPv4) Setup (when an IP address is automatically assigned) If an IP address will be automatically assigned, configure the settings below. NOTE: The [DHCP] and [Auto-IP] settings are enabled by default. Specify the settings below when Network Setup on page 8-149 have been changed from their default state. Use the procedure below to setup the TCP/IP (IPv4) setting. 1 Press the System Menu/Counter key on the main unit operation panel. Login User Name: L b Login Password: When you are performing user management and have not logged in, a login screen will appear. Then, enter the Login User Name and Login Password to log in. [ Login ] NOTE: Refer to Character Entry Method on Appendix-7 for details on entering characters. Sys. Menu/Count.: a b 1 Report 2 Counter *3 **S*y*s*t*e*m [ Exit ] 2 In the Sys. Menu/Count. menu, press the U or V key to select [System], and then press the OK key. Administrator only. IMPORTANT: To make the settings, you must have logged in using a Login User Name with administrator privileges. The default settings of the Login User Name and Login Password are both "2600". If you have logged in using a Login User Name without administrator privileges, the screen will display Administrator only. and return to the standby screen. 2-14