Kyocera FS-C8008DN FS-C8008N/DN Operation Guide Rev-1.0 - Page 142
Setting the Auto Continue Recovery Time, Others, >Auto Continue >, >>Auto Continue
View all Kyocera FS-C8008DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
3.13 Other Modes 3.13.9 Setting the Auto Continue Recovery Time Follow the procedure given below to change the recovery time for Auto Continue. 1 Press the MENU key. 2 Press the U or V key repeatedly until Others > appears. Others > 3 Press the Z key. 4 Press the U or V key repeatedly until Auto Continue Mode > appears. >Auto Continue > Mode On 5 Press the Z key and display >> Auto Continue Timer. The default setting is 30 seconds. >>Auto Continue Timer 030sec. 6 Press the ENTER key. A blinking cursor (_) appears. >>Auto Continue Timer 030sec. 7 Press the U or V key to increase or decrease the value at the blinking cursor and set the desired time. The time must be set between 000 and 495 seconds, in 5-second increments. If set to 000, printing will be continued immediately without any time interval. You can use the Z and Y keys to move the cursor right and left. 8 Display the desired time and press the ENTER key. 9 Press the MENU key. The display returns to Ready. 3-97