Kyocera KM-3035 DF-73 Operation Guide Rev 1B - Page 11

Handling a staple jam

Get Kyocera KM-3035 PDF manuals and user guides View all Kyocera KM-3035 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

6. Reinstall the staple holder in its original location inside the staple unit. The staple holder will click into place when it is properly inserted. 7. Close the stapler cover. (B) Handling a staple jam If a paper jam happens to occur during stapling, a staple may have jammed. In this case, perform the following procedure. 1. Remove the staple holder using the same procedure as in "Replenishing staples". Then, open the face plate by pushing on the tab (B) with your finger. 2. Remove any jammed staples from the front of the staple holder (where the staples are set). 3. Push the face plate closed into its original position. 4. Reinstall the staple holder in its original location inside the staple unit. The staple holder will click into place when it is properly inserted. 5. Close the stapler cover. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
9
6.
Reinstall the staple holder in its original
location inside the staple unit. The staple
holder will click into place when it is
properly inserted.
7.
Close the stapler cover.
Handling a staple jam
If a paper jam happens to occur during
stapling, a staple may have jammed. In this
case, perform the following procedure.
1.
Remove the staple holder using the same
procedure as in “Replenishing staples”.
Then, open the face plate by pushing on
the tab (B) with your finger.
2.
Remove any jammed staples from the
front of the staple holder (where the
staples are set).
3.
Push the face plate closed into its original
position.
4.
Reinstall the staple holder in its original
location inside the staple unit. The staple
holder will click into place when it is
properly inserted.
5.
Close the stapler cover.
(B)