Kyocera KM-3050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 158
Clearing Staple Jams, Optional Equipment, OPERATION GUIDE, Adding Staples
View all Kyocera KM-3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Optional Equipment Clearing Staple Jams 1 Pull out the staple holder referring to steps 1 and 2 of Adding Staples. 2 Holding the knob A on the face plate of the staple holder, lift the face plate. A 3 Clear the staple jammed in the cartridge end (staple-loaded side). 4 Lower the face plate of the staple holder. 5 Insert the face plate back in place. When fully inserted, the face plate locks with a clicking sound. 6 After lifting the staple unit slightly, lower it and insert it again into its place. 7 Close the stapler front cover. 4-8 OPERATION GUIDE
Optional Equipment
4-8
OPERATION GUIDE
Clearing Staple Jams
1
Pull out the staple holder referring to steps 1 and 2 of
Adding Staples
.
2
Holding the knob A on the face
plate of the staple holder, lift
the face plate.
3
Clear the staple jammed in the
cartridge end (staple-loaded
side).
4
Lower the face plate of the
staple holder.
5
Insert the face plate back in place. When fully inserted, the face plate locks
with a clicking sound.
6
After lifting the staple unit slightly, lower it and insert it again into its place.
7
Close the stapler front cover.
A