Kyocera KM-5230 F-4220 Instruction HB - Page 17
original position., Push back the stitcher unit in, and close front lower cover.
View all Kyocera KM-5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Troubleshooting 4. Remove the stapler cartridge by pulling both end. 5. Push down A, then lift up the B. 6. Remove the stapler which is caught, then push B back to the position. 7. Install back the cartridge. 8. Pull the stitcher toward you, then fit back the stitcher to the original position. 9. Push back the stitcher unit in, and close front lower cover. Note: Please confirm that after closing front cover, the machine empty staples couple times until it comes to the original position. - 14 -
Troubleshooting
4.Remove the stapler cartridge by pulling both end.
5.Push down A, then lift up the B.
6.Remove the stapler which is caught, then push B back to the
position.
7.Install back the cartridge.
8.Pull the stitcher toward you, then fit back the stitcher to the
original position.
9.Push back the stitcher unit in, and close front lower cover.
Note:
Please confirm that after closing front cover, the machine empty
staples couple times until it comes to the original position.
- 14 -