Kyocera KM-6030 Scan to FTP Operation Guide - Page 1
Kyocera KM-6030 Manual
View all Kyocera KM-6030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
FTP Transmission The FTP transmission converts the data of originals scanned on this machine to the PDF or TIFF format and uploads it directly to an FTP server. As upload destinations, up to 10 FTP servers can be registered. Uploading data to the 10 FTP servers simultaneously is available. In environment where an FTP server is operating, additional software installation is not necessary. Important! Available FTP servers for uploading are limited to those on the LAN. Before using the FTP transmission In order to access an FTP server, you must consult the server administrator to check the following information on each server and register them to this machine. • User name • Password • Host name or IP address of FTP server • Port number (normally 21) • Path (path from the home directory of the FTP server to the folder for storage) Registering a transmission destination FTP server Register a transmission destination FTP server to the address book. Up to 10 servers can be registered. This section explains how to register the information to this machine using web browser software. The same registeration can be performed on the operation panel of this machine. 1 Start web browser software. 2 Enter the IP address or the host name of the scanner interface card in the address entry field and press the Enter key on the keyboard. 3 The top page of the web page function is displayed. 4 Click [Destination List] under "Scan to FTP" Setting. 5 Click the number to register in the list. 6 Fill in the registration form of the transmission destination FTP server. Registration Name Enter the name of the transmission destination. FTP Server Enter the host name or the IP address of the FTP server. Port Number Enter the port number of the FTP server (normally 21). Path Enter the path of the required folder for uploading data. For example, to store data in the ScanData folder in the home directory, enter \ScanData. If nothing is entered, data is stored in the home directory. Skip Authentication Select [Yes], to omit entry of the user name and the password in transmission. When setting [Yes], register Login Account Name and Password below. Login Account Name Enter the user name for login to the FTP server. Password Set up the password to login the FTP server. 7 When all the entry is complete, click [Registration]. This is the end of the registration.