Kyocera KM-C1530 Fiery X3e Print Guide for Ver.2.0
Kyocera KM-C1530 Manual
 |
View all Kyocera KM-C1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-C1530 manual content summary:
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 1
Fiery X3e PRINTING GUIDE - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 2
and administration of the Fiery X3e for the supported platforms and network environments. It also includes guidelines for setting up UNIX, Windows NT 4.0/2000, and Novell NetWare servers to provide printing services to users. • The Printing Guide describes the printing features of the Fiery X3e - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 3
subject to change without notice and does not represent a commitment on the part of Electronics For Imaging, Inc. The software described in Fiery Z9, Fiery Z16, Fiery Z18, Fiery Document WorkStation, Fiery Downloader, Fiery Driver, Fiery FreeForm, Fiery Link, Fiery Prints, Fiery Print Calibrator, - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 4
if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of any copies of the Software or portions thereof, except as necessary for backup or archive purposes in support of your use of the Software as permitted hereunder. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 5
Software and all of its component parts , AND/OR REPAIR OF THE PRODUCT United Nations Convention on Contracts for the International Sale of Goods (1980). This Agreement is the entire agreement held between us and supersedes any other communications or advertising with respect to the Software - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 6
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 7
14 Working with custom page sizes in the Windows 9x/Me PostScript printer driver 1-16 Working with custom page sizes in the Windows NT PostScript printer driver 1-19 Working with custom page sizes in the Windows 2000/XP PostScript printer driver 1-22 Saving files to print at a remote location - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 8
viii Contents Chapter 4: Downloading Files and Fonts Using Fiery Downloader or WebDownloader 4-1 Downloading printer fonts 4-4 Managing Chapter 6: Scanning Fiery Remote Scan components 6-1 Scanning from the copier with Scanner Mode 6-2 One-Touch scanning 6-6 Using Fiery Remote Scan - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 9
B-6 PCL printer fonts B-7 Appendix C: Troubleshooting Maintaining optimal system performance C-1 Troubleshooting C-1 General printing problems C-2 Problems with print quality C-4 Problems with Fiery Downloader C-5 Problems with Fiery Scan C-6 Problems with Fiery WebTools C-6 Index - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 10
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 11
the Job Management Guide. About this manual This manual is intended for remote users who send jobs via the network and the Fiery X3e. It covers the following topics: • Printing from a Windows computer • Printing from a Mac OS computer • Printing from a UNIX workstation • Downloading files and fonts - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 12
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 13
E-mail Service. For supported file versions, see the User Software Installation Guide. For basic instructions and details on using Fiery Downloader, see Chapter 4. For basic instructions on using the Fiery E-mail Service, see Chapter 8. NOTE: For information on setting up the Windows environment for - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 14
information, see the User Software Installation Guide. The following procedures explain how to use the driver to specify print options. For information about specific print options, see Appendix A. NOTE: The following procedures use Windows 98 illustrations. The interface may vary slightly depending - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 15
tab serves as the control center for all frequently used printing functions. NOTE: Supported tabs and print options may vary between Windows 9x/Me, Windows NT 4.0, and Windows 2000/XP PostScript and PCL drivers. For a complete list of print options, see Appendix A. 4. Click the ColorWise (PostScript - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 16
11-4 Printing from Windows Computers PostScript PCL Specify the color profile options for the job. In the Print Mode area, specify the color , such as Rendering Style, click Expert Settings and proceed to step 5; otherwise, skip to step 6. NOTE: Expert Settings is not supported for the PCL driver. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 17
current Fiery X3e settings. Click Update If Update does not appear, make sure Two-Way Communication is set up, as described in the User Software Installation Guide. NOTE: Specify the color settings for the print job and click OK. 6. Click the Owner Information print option bar. Enter the Group Name - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 18
tools" is used in this manual to refer to Command WorkStation, Fiery Spooler, and WebSpooler. For information about these options and overrides, see Appendix A. For information on configuring installable options, see the User Software Installation Guide. For more information about job management - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 19
X3e as your current copier. 10. Click OK. TO SET DEFAULT PRINT OPTIONS FOR ALL WINDOWS PRINT JOBS USING THE PCL OR ADOBE POSTSCRIPT PRINTER DRIVER 1. Click Start, features. NOTE: Although the user interface differs slightly, the following procedures are the same for both PCL and PostScript printer - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 20
11-8 Printing from Windows Computers TO CREATE SAVED SETTINGS 1. Make sure that Default Settings appears in the Saved Settings menu, and then configure options from the print option bars. As soon as you change any settings, the Saved Settings menu displays Untitled instead of Default Settings. Disk - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 21
11-9 Printing from applications TO DELETE SAVED SETTINGS 1. From the Fiery Printing tab, click the Settings button. 2. Choose the settings you want to delete and click Delete. 3. Click Yes to confirm the deletion and click OK. TO MODIFY SAVED SETTINGS 1. From the Fiery Printing tab, click the Saved - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 22
11-10 Printing from Windows Computers TO EXPORT SAVED SETTINGS 1. From the Fiery Printing tab, click the Settings button. 2. Choose the Saved Settings you want to export and click Export. 3. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 23
11-11 Printing from applications TO IMPORT SAVED SETTINGS 1. From the Fiery Printing tab, click the Settings button. 2. Click Import. 3. Browse to the location of the saved settings file you want to import. 4. Select the file and click OK. 5. Click OK in the Settings dialog box. NOTE: When you import - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 24
11-12 Printing from Windows Computers Using Shortcuts The Shortcuts area of the driver interface displays the current settings for some of the most commonly used print options. You can access and change these settings quickly and easily using the Shortcuts. You can also access some page layout and fi - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 25
PAGE SHORTCUTS 1. From the Fiery Printing tab, click the Finishing tab, position your cursor over the page image, and then right-click. 2. Specify the appropriate settings for the print options. 3. Click Apply to Width Height Width NOTE: Custom page sizes are not supported with Imposition jobs. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 26
PCL PRINTER DRIVERS 1. Click Start, choose Settings, and then choose Printers. 2. Right-click the Fiery X3e PCL icon and choose Properties (Windows 98/Me), Document Defaults (Windows NT), or Printing Preferences (Windows 2000/XP). 3. Click the Fiery Printing tab and click the Paper Source print - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 27
-Enter the length of the print job. Units-Select a unit of measurement for the print job. 6. Click OK to close the Enter Paper Size window. 7. Click OK to close the Fiery X3e printer driver. TO EDIT A CUSTOM PAGE SIZE WITH ALL WINDOWS PCL PRINTER DRIVERS 1. Click Start, choose Settings, and then - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 28
the Paper Source print option bar. 4. Select Manual Bypass Tray from the Paper Source menu. 5. Select Custom from the Page Size menu. 6. Click OK and then click OK again to print the job. Working with custom page sizes in the Windows 9x/Me PostScript printer driver With custom page sizes, you define - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 29
options to define the custom page size. Width-Enter the width of the print job. Length-Enter the length of the print job. Units-Select a unit of measurement for the print job. Transverse-Select this option to swap Width and Length dimensions to correspond to the paper feed direction of the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 30
PAGE SIZE WITH THE WINDOWS 9X/ME POSTSCRIPT PRINTER DRIVER 1. Choose Print from your application. 2. Select the Fiery X3e PS icon as the printer and click Properties. 3. Click the Fiery Printing tab, and then click the Paper Source print option bar. 4. Select Manual - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 31
it from within an application without redefining it each time you print. NOTE: The copier must be set to print custom page sizes. TO DEFINE A CUSTOM PAGE SIZE WITH THE WINDOWS NT 4.0 POSTSCRIPT PRINTER DRIVER 1. Click Start, choose Settings, and then choose Printers. 2. Right-click the Fiery X3e PS - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 32
Windows Computers The PostScript Custom Page Size Definition dialog box appears. 5. Specify options to define the custom page size. Custom Page Size Dimensions-Enter the width and height of the print job. Unit-Select a unit PAGE SIZE WITH THE WINDOWS NT 4.0 POSTSCRIPT PRINTER DRIVER 1. Click Start, - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 33
Custom Page Size. 5. Edit the settings, as described on page 1-20, and click OK. TO PRINT A CUSTOM PAGE SIZE WITH THE WINDOWS NT 4.0 POSTSCRIPT PRINTER DRIVER 1. Choose Print from your application. 2. Select the Fiery X3e PS as the printer and click Properties. 3. Choose PostScript Custom Page from - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 34
you print. NOTE: Windows 2000 and Windows XP have a similar interface when setting options and printing. The following procedures use Windows 2000 illustrations, with Windows XP differences noted. TO DEFINE A CUSTOM PAGE SIZE WITH THE WINDOWS 2000/XP POSTSCRIPT PRINTER DRIVER 1. Click Start, choose - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 35
Size Dimensions-Enter the width and height of the print job. Unit-Select a unit of measurement for the print job. Paper Feed Direction-Choose the paper application. TO EDIT A CUSTOM PAGE SIZE WITH THE WINDOWS 2000/XP POSTSCRIPT PRINTER DRIVER 1. Click Start, choose Settings, and then choose Printers - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 36
files to take to a service bureau or other location, print the final files to the File port (as opposed to one of the local ports). You can also print to the File port to create a file to download using Fiery Downloader. For instructions on printing to the File port, see your Windows documentation. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 37
(PS), Encapsulated PostScript (EPS), Tagged Image File Format (TIFF), or Portable Document Format (PDF) files using Fiery Downloader. For supported file versions, see the User Software Installation Guide. For details on using Fiery Downloader, see Chapter 4. Printing from applications Before - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 38
Name>_ from the "Select a PostScript Printer" list. The names of all supported printers in the zone appear. NOTE: If your system administrator has not enabled enabling print connections, see the Configuration Guide. 6. Close the Chooser window. The Fiery X3e remains selected as the current printer until - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 39
the administrator or the operator for information on the current server default settings. TO SET PRINT OPTIONS AND PRINT WITH THE ADOBEPS PRINTER DRIVER 1. Open a file and choose Page Setup from the application's File menu. 2. Choose Page Attributes in the dialog box that appears. Select the Fiery - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 40
22-4 Printing from Mac OS Computers 5. Choose Print from the application's File menu. 6. Select the Fiery X3e as your printer and specify settings for the print options displayed. NOTE: Print dialog boxes vary across applications. From the Paper Source menu, choose the paper tray for the job. For - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 41
Name and Group Password from the Command WorkStation, WebSpooler, or Fiery Spooler Properties window. The information you enter in the Notes field can be viewed by the Command WorkStation overrides, see the Job Management Guide. For information on entering the Starting Distribution Number, Account Number - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 42
copier; you may have to scroll to see all the options. They override settings in Fiery X3e Printer Setup, but can be changed Soft Reverse Order, and Manual Duplex that are selectable from . The application or Adobe PS printer driver may not set up the file properly instructions to resolve the conflict. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 43
22-7 Defining custom page sizes 9. To make the new settings the default settings, click Save Settings. 10. Click Print. Defining custom page sizes With custom page sizes, you can define page dimensions and margins. After you define a custom page size, you can use it from within an application without - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 44
22-8 Printing from Mac OS Computers 6. To save this custom page size, enter a name and click Add. Saved custom page sizes appear in the menu of page sizes in the upper-right corner of the dialog box. To remove a saved custom page size, choose it from the menu and click Remove. 7. Click OK. TO EDIT A - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 45
be manipulated from Command WorkStation, or from Windows and Mac OS computers on the network using WebSpooler, see the Job Management Guide. The queue name and Fiery X3e about setting up printing from TCP/IP, see your UNIX system documentation. manual pages or other documentation. NOTE: Only PostScript and - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 46
33-2 Printing from UNIX Workstations TO PRINT FROM UNIX • On a system running SunOS 4.1.x or another BSD-based variant, use the lpr command to send a job to the Fiery X3e, as follows: lpr For example, if the Print queue of your Fiery X3e is named print_Server, your - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 47
33-3 Printing to the Fiery X3e TO REMOVE JOBS FROM THE QUEUE NOTE: Unless you log in as the root user, you can remove only your own jobs. • On a system running SunOS 4.1.x or another BSD-based variant, use the lprm command to remove jobs from the queue, as follows: lprm You - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 48
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 49
connection. For information on installing and configuring Fiery Downloader and WebDownloader on supported networking protocols, see the User Software Installation Guide. NOTE: The Windows and Mac OS version of Fiery Downloader and WebDownloader are fundamentally the same; differences are noted - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 50
from the Start >Programs menu. 2. Select the Fiery X3e in the Chooser window and click OK (Windows) or Connect (Mac OS). The Fiery Downloader Status window appears, displaying the Fiery Downloader toolbar, menus, and status bar. Displays server status and user and document name of the job currently - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 51
, click to display a list of printer fonts on the Fiery X3e hard disk. Click to view version information about Fiery Downloader. 3. To view font information in the window, choose Font List from the File menu, or click the Font List button. 4. To select a different Fiery X3e, choose Open from the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 52
by selecting the appropriate option in the application's Print dialog box. With some applications, you can also save EPS and TIFF files. If you experience problems printing EPS files with Fiery Downloader, print the file directly from the application in which you created it. 2. Start Fiery - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 53
or WebDownloader 4. Choose the file type to display from the Files of type (Windows) or Show (Mac OS) menu. All Known Formats lists all files in formats supported by Fiery Downloader. You can download files and fonts in the same batch. If the fonts are used by files in the same batch, the fonts - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 54
and then Shift-click the last file. Control-click to select multiple non-sequential files. If you change your mind about a file, select the file name in the Files to Download list and click Remove File(s) (Windows) or Remove (Mac OS). Click Remove All (Mac OS) to remove all files from the Files - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 55
44-7 Using Fiery Downloader or WebDownloader Copies-Enter the number of copies. Brightness (PostScript and EPS files only)-Change the Brightness setting if a file appears to be too dark or too light. Choose 85% for a substantially lighter image, 115% for a substantially darker image, or one of the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 56
Folder (Mac). 4. Click OK. The font backup file is saved. TO RESTORE FONTS 1. Start Fiery Downloader. 2. Choose Restore fonts from the File menu. 3. Open the font backup file from the saved location, and click OK (Windows) or Select this folder (Mac), This replaces all the user fonts on the Fiery X3e. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 57
Downloader cannot download TrueType fonts. If you use TrueType fonts in Windows, convert them to Adobe Type 1 before printing. To convert to Adobe Type 1 fonts for Windows 9x/Me, click the Fonts tab in the Adobe PS printer driver and setup the Font Substitution Table. For Windows NT 4.0/2000/XP - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 58
Guide. Occasionally, you may want to use Adobe Type 1 (Windows) or PostScript (Mac OS) fonts that are not included with the Fiery X3e. If so, you must install both the screen fonts and the printer fonts on your computer. To do this, follow the instructions from the font manufacturer. Downloading - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 59
44-11 Using Fiery Downloader or WebDownloader TO VIEW FONT INFORMATION, UPDATE, PRINT, AND in this procedure. For information on how to publish the Direct connection, see the Configuration Guide or consult your administrator. The Font List dialog box includes Update, Print, and Delete buttons. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 60
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 61
describes the variable data printing features supported by the Fiery X3e, including of a document with a set of variable elements that change from copy to copy. An example is a brochure a variable-element job to the Fiery X3e with instructions to combine the job with a particular Fiery FreeForm - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 62
mail merge feature, a page layout application that supports scripting, or a database application. FreeForm functions are controlled with two print options: Create Master and Use Master. You can set these options in the printer driver when you send a job, or instruct the operator to set them with job - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 63
you arrange the master elements (text and graphics that do not change) on one or more pages, leaving space for the variable elements Although the Fiery X3e can store up to 100 FreeForm masters, the printer driver interface, Fiery WebSpooler, and Fiery Spooler allow you to select numbers 1 through 15 - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 64
merge function, a database application, or a page layout application that supports scripting. In all cases, information is taken from a list or Each application has different controls for this function; for detailed instructions, see the application documentation. Before the variable elements can be - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 65
Command WorkStation, Fiery Spooler, or Fiery WebSpooler. For more information about soft-proofing and thumbnail windows of Command WorkStation, see the Job Management Guide. Combined document A master document can include more than one page. When you print a variable document and specify a FreeForm - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 66
55-6 Printing Variable Data Documents Pages 1 and 2 of the variable document are combined with Pages 1 and 2, respectively, of the master document. The cycle of master pages then starts over, and Pages 3 and 4 of the variable document are combined respectively with Pages 1 and 2, again, of the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 67
to assign all FreeForm master numbers to avoid potential conflicts in the use of FreeForm master numbers. • Use the Job Notes and Instructions fields to communicate instructions about your job to the operator. If you want to create or use a FreeForm master number greater than 15, these fields can be - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 68
with the Create Master print option set to one of the FreeForm Master numbers (1 through 15). Or, set the Create Master option to None and instruct the operator to use overrides to create a FreeForm master from this job. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 69
set when you sent the master document, or one that was assigned by the operator. If you want to check the job before it prints, instruct the operator to RIP and Hold the job so you can preview it from Command WorkStation, Fiery Spooler, or Fiery WebSpooler. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 70
55-10 Printing Variable Data Documents The following example shows the FreeForm master and variable document combined. The variable data is simply overlaid on the master document. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 71
connection. For information on supported networking protocols, see the User Software Installation Guide. • Fiery Remote Scan must be installed as described in the User Software Installation Guide. • Photoshop RGB Setup should use EFIRGB ICC (Mac OS) or EFIRGB.icm (Windows) settings. For information - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 72
the copier glass or Automatic Document Feeder to the Fiery X3e, then open the image with WebScan or Fiery Remote Scan. You can then send the scan to a hard disk drive using a mailbox, an e-mail address, Internet fax, or FTP site. Scan from Scanner Mode in one of the following ways. Manually scan - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 73
with Scanner Mode 2. Press the Scan key on the copier. The Select Destination screen appears in the Touch Panel. The Destination tab appears by default. 3. Press Direct. A screen appears that allows you to enter letters - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 74
settings. For information on changing default settings, see the documentation that came with the Interface kit. Default settings are 6.0 format file, use an application that supports this format. Scan jobs with multiple pages are not supported on some applications using TIFF 6. For more information - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 75
66-5 Scanning from the copier with Scanner Mode Compression Level High Quality-Scan with high the pale color, set Background Remove to Darker. Brightness-Select one of the seven Brightness levels manually. Choose a level to the left to increase the brightness. Scan Size Auto Detect-Detect the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 76
to Scan. NOTE: For Internet FAX, available settings are limited using the copier. The following settings are fixed and cannot be changed: Color Mode-Monochrome Resolution-200 dpi Scan Size: International paper sizes-A3, information on the Fiery X3e home page, see the Interface kit documentation. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 77
you can easily call them up through the Destination tab. 1. Place the original face down on the copier glass or face up in the Automatic Document Feeder. NOTE: When scanning transparencies on the copier glass, place a blank white page the same size as the original over the transparency. 2. Press the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 78
can select the Temporary Registration key or a One-Touch key. For more information about these keys, see the Fiery X3e home page documentation for your copier. NOTE: You can see the Send Mode destination in the upper-right corner of the Select Destination screen. 5. Press Start. The scan job is sent - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 79
. NOTE: Fiery Remote Scan for Windows and Mac OS versions are similar. The following procedures use Windows illustrations, with any Mac OS differences Fiery X3e. For instructions, see the User Software Installation Guide. 4. If you are scanning a single original, place it on the copier glass; if you - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 80
66-10 Scanning Fiery Remote Scan application Fiery Remote Scan TWAIN plug-in - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 81
you retrieve a scan, you first scan the image to a mailbox using the Scanner Mode (see page information about using DocBuilder Pro, see the Job Management Guide. You can also save the scan to your Scan for Windows and Mac OS versions are similar. The following procedures use Windows illustrations, - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 82
66-12 Scanning Fiery Remote Scan application Fiery Remote Scan TWAIN plug-in - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 83
66-13 Using Fiery Remote Scan 5. Click Change Mailbox. 6. Enter the appropriate Mailbox and password, and click OK. NOTE: To access your mailbox, you must enable mailboxes in Setup. For more information, see the Configuration Guide. 7. Click Refresh. All scanned images for that mailbox are listed. 8. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 84
66-14 Scanning TO SEND A SCAN JOB TO A DESTINATION 1. After selecting the scan file to send, click Send at the bottom of the Send dialog box. 2. To send the job to the Hold queue, select Fiery Hold Queue. 3. To send the scan job to a disk drive, select Save to Disk, choose a file format, and click - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 85
File Format (TIFF or PDF). NOTE: Scanned TIFF files are in TIFF 6 format. NOTE: If you open a TIFF 6.0 format file, use an application that supports this format. Scan jobs with multiple pages are not supported on some applications using TIFF 6. For more information, see your application documentation. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 86
Format (TIFF or PDF). NOTE: Scanned TIFF files are in TIFF 6 format. If you open a TIFF 6.0 format file, use an application that supports this format. Scan jobs with multiple pages are not supported on some applications using TIFF 6. For more information, see the documentation for your application. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 87
66-17 Using Fiery Remote Scan 10. To send the scan file via Internet FAX, select Internet FAX and click Edit Internet FAX. NOTE: You must enable Internet FAX in the Initiate tab before you can select Internet FAX in the Send dialog box. The Internet FAX message dialog box appears. This serves as the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 88
. The WebScan dialog box appears. 2. Enter the Mailbox name in the Mailbox field. NOTE: The Mailbox name is the directory you specified with the copier's Scanner Mode. The password is not needed if the mailbox password is not enabled on the Fiery. If the password is enabled, the Mailbox name - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 89
6.0 format file, use an application that supports this format. Scan jobs with multiple pages are not supported on some applications using TIFF 6. For more from its current location, or save the file to disk. The scanned image is displayed in your web browser. NOTE: You must have Adobe Acrobat installed - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 90
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 91
and the access privileges needed to use them, see the Job Management Guide. • Fiery WebTools do not require any special access privileges. As long as the administrator has enabled Web Services in Setup and provided users with the IP address of the Fiery X3e, anyone can use them. Accessing Fiery - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 92
ACCESS FIERY WEBTOOLS 1. Start your Internet browser. For information about supported platforms and browsers, see the User Software Installation Guide. 2. Type the IP address or the DNS name of the Fiery X3e. For this and click Status. The current RIP Status and Printer Status appear in the window. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 93
the recommended resolution. For more information, see System Requirements in the Quick Start Guide. To open a new browser window for the Status display, click Float. You can then close other browser windows and leave the Status window open to continue checking the status of the Fiery X3e. As long as - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 94
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 95
X3e when you choose Print from an application. For more information about setting up the E-mail Port Monitor, see the User Software Installation Guide. Fiery E-mail Service also supports Scan to E-mail and Scan to Internet FAX, features that allow you to scan a document and send it to an e-mail - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 96
Fiery E-mail Service The Fiery X3e also supports internal address books. Administrators can retrieve, add, delete, and clear addresses from the address books by sending requests via e-mail. For more information about address books, see the Configuration Guide. NOTE: Fiery E-mail Service will not - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 97
cation (ID), which allows you to manage jobs with Job Control (see the following section). The e-mail notification indicates any current error at the copier. Once the job has been printed, you receive a second e-mail notification that indicates the job printed successfully. To check the status of your - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 98
up the E-mail Port Monitor, you can print using Fiery E-mail Service in the same manner as any other printing method. No additional steps are necessary. NOTE: The E-mail Port Monitor is only supported on Windows. NOTE: The Direct connection is not supported when printing with E-mail Port Monitor. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 99
tab. 5. Set the print options and click OK. Your job is sent to the Fiery X3e. To set options using the printer driver, see "Setting options and printing from Windows computers" on page 1-2. NOTE: If the attachment exceeds the file size limitation set in your application, the attachment may be broken - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 100
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 101
computers on the network, processes (RIPs) them, and then sends them to the copier. Windows and Mac OS computers communicate with the Fiery X3e by means of a printer driver and printer description (PPD) files. Windows computers can also communicate with the Fiery X3e by means of a Printer Control - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 102
applications With the Adobe PostScript printer drivers, you can specify job settings Downloader. To change options in Fiery Downloader, select a job in the Files to be Downloaded (Windows) or Files to Download Guide. • Overrides from Command WorkStation, Fiery WebSpooler, and Fiery Spooler To change - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 103
. Default settings In the following table, underlined settings in the Option and settings column indicate default printer driver settings (PPD defaults). If you do not use the printer driver interface to configure a particular option, the Fiery X3e prints the job with the underlined setting. For - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 104
Fiery X3e Setup. For Windows, choose Expert Color as Guide. This option is not supported for PCL. Select On to print the job so that it appears as a booklet. Select Off to print a job from the first page to the last. The Duplex unit must be installed. Select 85% for a substantially lighter image - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 105
access this option. For more information, see the Color Guide. This option is not supported for PCL. Color Mode Printer's default/CMYK/Grayscale (from the Mac OS driver) Or Print Mode Standard Color/Expert Color/Grayscale (from the Windows drivers) Or Printer's default/CMYK/Grayscale (from the PCL - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 106
image data as a normal print job. Select Memory to store the print job to the copier's memory. Select Hard Disk Drive to store the print job to the copier Disk Drive in the copier must be installed. Select upside down. The Duplex unit must be installed. print some kinds of images. In that case, - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 107
Specify if you want to punch holes for your job. The Folding Finisher must be installed in order to use this option. Instructions Lock Job Off/On Enter instructions for the operator about the job. Specify whether to lock your job before it prints. Media Type Plain Paper/Recycled Plain/Exclusive - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 108
same result as the SMPTE setting. For more information, see the Color Guide. This option is not supported for PCL. (Other) White Point Specify a source white point value for Printer's default/5000 K (D50)/ printing RGB images, objects, and text. 5500 K/6500 K (D65)/7500 K/9300 K The Printer - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 109
specified in Fiery X3e Setup. For Windows, choose Expert Color as the Print Mode to access this option. This option is automatically set to On if the Black Overprint option is set to On. For more information, see the Color Guide. This option is not supported for PCL. Select On when using - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 110
use when you print RGB images, objects, and text. The Printer's default setting reflects the setting specified in Fiery X3e Setup. For Windows, choose Expert Color as the Color Mode to access this option. For more information, see the Color Guide. This option is not supported for PCL. RGB Separation - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 111
Setup. For Windows, choose Expert Color as the Color Mode to access this option. For more information, see the Color Guide. This option is not supported for PCL or the hard disk multiple copy jobs. The number appears drive in the copier must be installed. as a watermark in the center of the page. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 112
your application and locate the Duplex print option. The location of Fiery X3e print options varies, depending on the printer driver you are using. 2. Choose one of the Duplex settings: Left Binding-Prints the top of the image on Side 1, on the same edge of the page as the top of the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 113
types, see the copier documentation for paper specifications. Paper Source If you choose the Auto Select setting, the copier prints from any print job from the Fiery X3e PS or PCL printer driver. TO SPECIFY AN UNLOCK AND PRINT JOB ON A WINDOWS COMPUTER 1. Choose Print from the application's File menu. - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 114
AA-14 Print Options TO SPECIFY AN UNLOCK AND PRINT JOB ON A MAC OS COMPUTER 1. Choose Print from the application's File menu. 2. Select Printer Specific Options from the pull-down menu. 3. In the Lock Job field, specify Yes. 4. Set other print options. 5. Select Fiery Job Notes from the pull-down menu - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 115
, install the corresponding screen fonts from the User Software CD. For instructions, see the User Software Installation Guide. Adobe Type 1 fonts The Fiery X3e includes Antique Olive Compact Arial Bold Italic Arial Bold Arial Italic Windows menu name, style Albertus MT Lt Albertus MT Albertus MT - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 116
-Oblique Courier Oblique Courier-BoldOblique Courier BoldOblique Eurostile Eurostile Eurostile-Bold Eurostile Bold Eurostile-ExtendedTwo Eurostile ExtendedTwo Windows menu name, style Arial AvantGarde AvantGarde, Bold AvantGarde, Italic AvantGarde, Bold Italic Bodoni Bodoni, Bold Bodoni - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 117
Helvetica Helvetica Bold Helvetica Oblique Helvetica BoldOblique Helvetica Narrow Helvetica Narrow Bold Helvetica Narrow Oblique Helvetica Narrow BoldObl Windows menu name, style Eurostile ExtendedTwo, Bold GillSans GillSans, Bold GillSans, Italic GillSans, Bold Italic GillSans Light GillSans Light - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 118
BB-4 Font List PostScript name Mac OS menu name Windows menu name, style JoannaMT JoannaMT-Bold JoannaMT-Italic Joanna MT Joanna MT Bd Joanna MT It Joanna MT Joanna MT, Bold Joanna MT, Italic JoannaMT- - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 119
BB-5 Font List PostScript name Mac OS menu name Windows menu name, style StempelGaramond-Italic StempelGaramond-BoldItalic Symbol StempelGaramond Italic StempelGaramond BoldItalic Symbol StempelGaramond Roman, Italic StempelGaramond Roman, Bold Italic Symbol Tekton Times-Roman Times- - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 120
Chicago Geneva Hoefler Text Black Hoefler Text Black Hoefler Text Hoefler Text Monaco New York Wingdings Windows menu name, style Univers 57 Condensed, Italic ZapfChancery ZapfDingbats Windows menu name, style Apple Chancery Chicago Geneva Hoefler Text Black Hoefler Text Black, Italic Hoefler Text, Italic - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 121
BB-7 Font List PCL printer fonts The following 45 Roman PCL fonts and 1 bitmap font are resident on the Fiery: • Albertus Medium, Albertus Extra Bold • Antique Olive, Antique Olive-Bold, Antique Olive-Italic • Arial, Arial-Bold, Arial-Italic, Arial-BoldItalic • CG Omega, CG Omega-Bold, CG Omega- - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 122
- Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 123
CC-1 Troubleshooting Appendix C: Troubleshooting This appendix provides troubleshooting tips. Maintaining optimal system performance The Fiery X3e does not require maintenance. Beyond the routine requirements of servicing and maintaining the copier and replenishing consumables, you can improve the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 124
Troubleshooting General printing problems If this happens You cannot connect to the Fiery X3e. You cannot select or view one of the queues. You cannot connect to the Fiery X3e from a Windows is configured correctly. For instructions, see the User Software Installation Guide. • Print to a queue - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 125
CC-3 Troubleshooting If this happens One or more Media Type options are dimmed. The Fiery X3e does not respond to a Print command. You cannot print with QuarkXPress 3.32 using the PSPrinter 8.7.2 driver on a Mac OS computer. Try this • Select a Paper Source that supports the Media Type you are - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 126
this file, see the User Software Installation Guide. • Make sure the system has been calibrated. For instructions, see the Color Guide. • Ask the operator to print a Test Page with the copier. The problem may be with the copier. If your Test Page shows that the copier is working properly, correct the - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 127
. • Make sure the connection is configured correctly. For instructions, see the User Software Installation Guide. • Try printing using the 'showpage' after EPS files (Windows) or 'showpage' (Mac OS) option in the Download PostScript File dialog box. This option adds a showpage PostScript language - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 128
CC-6 Troubleshooting Problems with Fiery Scan If this happens: Fiery Scan main window does not appear after launching. Try this • Check to see if the TWAIN module(s) installed by Adobe Photoshop are located in the correct folder. If not, reinstall Adobe Photoshop software. Problems with Fiery - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 129
EFIRGB.icm file 6-1 EPS (Encapsulated PostScript) files downloading 4-1 downloading from Windows 1-1 problems downloading C-5 F Fiery Downloader Brightness option 4-7 choosing a printer 4-3 Connection Type 4-5 Download Progress bar 4-2 downloading file or font 4-4 to 4-7 Hard Disk area 4-2 installing - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 130
port, saving files to 1-24 Files of type menu (Windows) 4-5 font list Adobe Type 1 B-1 displaying 4-3, 4-11 PCL B-7 PostScript B-1 to B-6 printing 4-3, 4-11 TrueType B-6 Font List button 4-3 fonts Adobe Type 1 4-10, B-1 downloading and managing 4-1, 4-5 installing 4-10 PostScript 4-10 printer fonts - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 131
Paper Source menu Mac OS 2-4 Paper Source option A-13 PCL printer description files, see PDDs PCL printer drivers Windows 1-2 PDF files downloading 4-1 downloading from Windows 1-1 font substitution 4-10 performance, optimizing C-1 Phosphors option A-8 Portable Document Format, see PDF files PostScript - Kyocera KM-C1530 | Fiery X3e Print Guide for Ver.2.0 - Page 132
T TCP/IP printing 3-1 Top-Bottom, duplex option A-12 tray selection Mac OS 2-4 trays, printer A-13 troubleshooting EPS files C-5 Fiery Downloader C-5 Fiery Scan C-6 Fiery WebTools C-6 general printing problems C-2 to C-3 print quality C-4 TrueType fonts B-6 U UNIX BSD (Berkeley Software Distribution
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
 |
 |
Fiery X3e
PRINTING GUIDE