Kyocera KM-C2230 Fiery X3e 22C-KM Configuration Guide for KM-C2230
Kyocera KM-C2230 Manual
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-C2230 manual content summary:
- Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 1
Fiery X3e 31C-M Color Server CONFIGURATION GUIDE - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 2
X3e 31C-M Color Server for the supported platforms and network environments. It also includes guidelines for setting up UNIX, Windows NT 4.0/ 2000/Server 2003, and Novell NetWare servers to provide printing services to users. • The Printing Guide describes the printing features of the Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 3
, ColorWise, EDOX, EFI, Fiery, the Fiery logo, Fiery Driven, RIP-While-Print and Spot-On are registered trademarks of Electronics for Imaging, Inc. in the U.S. or otherwise), will be limited to $50. PANTONE® Colors displayed in the software application or in the user documentation may not match - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 4
purposes in support of your use of the Software as permitted hereunder. You may not copy the Documentation. You may not attempt to localize, translate, disassemble, decompile, decrypt, reverse engineer, discover the source code of, modify, create derivative works of, or in any way change any part of - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 5
regulations, including the U.S. Export Administration Regulations, (2) you transfer to the person or entity all of the Software and Documentation (including all copies, updates, upgrades, prior versions, component parts, the media and printed materials, and this Agreement); (3) you retain no copies - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 6
Rights: Use, duplication, or disclosure of the Software by the United States Government is subject to restrictions as set forth modified or superceded, the subsequent or equivalent regulation shall apply. The name of the Contractor is Electronics for Imaging. General The rights and obligations of the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 7
-Windows with TCP/IP 2-2 Configuring a Windows NT 4.0/2000/Server 2003 server to communicate with the Fiery X3e 2-3 Fiery X3e on a NetWare network 2-8 Tips for experts-IPX networks 2-9 Overview of IPX printing to the Fiery X3e 2-9 Configuring a NetWare server for printing 2-10 Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 8
Fiery X3e print connections 3-1 Passwords 3-3 WebTools 3-4 Control level scenarios 3-6 About Setup 3-7 Network server setup requirements 3-8 Ensuring the copier/printer connection 3-8 Chapter 4: Performing Setup from the Control Panel Fiery X3e Setup from the Control Panel 4-1 Fiery - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 9
Setting up the Fiery X3e from a Windows Computer Accessing Setup 5-1 Remote Fiery Setup 5-1 General Setup options 5-3 Job Log Setup 5-5 Network Setup 5-6 Adapters/Ports 5-7 Protocols 5-9 Services 5-15 Windows print sharing with Server Message Block (SMB) 5-25 Printer Setup options - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 10
Shutting down, rebooting, and restarting the Fiery X3e 7-10 Shutting down and rebooting the Fiery X3e 7-10 Restarting the Fiery X3e 7-13 Appendix A: Troubleshooting Troubleshooting the Fiery X3e A-1 Troubleshooting during Setup from the Control Panel A-1 Runtime error messages A-6 Index - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 11
can print to the Fiery X3e 31C-M Color Server as a high-performance PostScript or PCL copier/printer. This manual describes how to set up network servers and clients to use the Fiery X3e 31C-M Color Server and how to install user software and set up printing from Microsoft Windows and Apple Mac OS - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 12
the services of an experienced network engineer. This manual is organized as follows: • Chapter 1 illustrates the supported network configurations and shows the network connectors on the Fiery X3e. • Chapter 2 provides guidelines for setting up Windows network servers and UNIX systems for printing to - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 13
on the Fiery X3e supports the following network protocols: • AppleTalk • TCP/IP (the lpd, nbt, and http protocols) TCP/IP stands for Transmission Control Protocol/Internet Protocol. The lpd protocol is the standard TCP/IP printing protocol. The nbt protocol supports Windows (SMB) printing. The port - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 14
the Fiery X3e over the network. These steps are described in the User Software Installation Guide, and some information is also provided in Chapter 2. • Administering the Fiery X3e Monitor and maintain system performance and troubleshoot problems that arise. For details, see Chapter 7 of this manual - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 15
X3e print queues and Fiery X3e users. No special configuration of AppleShare servers is required. FIERY X3E SETUP Fiery X3e On the Fiery X3e Control Panel, configure, at a minimum, the Server Setup, Network Setup, and Printer Setup. Configure the remaining Setups. CLIENT SETUP UNIX Mac OS Windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 16
the following pages show typical systems you can use to print and run Fiery software from remote workstations. Find the page with your preferred on the same cable. A solid connection from the Fiery X3e with an arrow indicates that other supported network types can be operational at the same time. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 17
Key to setup: 1 Mac OS computer 2 Fiery Setup Mac OS environment with AppleTalk User Software Installation Guide Chapter 4 Fiery X3e installed in the copier/printer 2 TCP/IP (http) for WebTools AppleTalk Mac OS computer 1 Mac OS computer 1 Mac OS computers can print directly Mac OS computer - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 18
in a Novell environment Key to setup: 1 NetWare server 2 Fiery X3e Setup 3 NetWare client 4 Windows computer with SPX page 2-14 Chapter 4 User Software Installation Guide page 2-9 Another supported protocol Fiery X3e installed in the copier/printer 2 NetWare server 1 IPX TCP/IP (http) for - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 19
Another supported protocol Windows NT 4.0/2000/XP/Server 2003 Workstation or Windows NT 4.0/2000/Server 2003 Server acting as print server 1 LAN with NETBEUI, etc. Fiery X3e installed in the copier/printer 2 TCP/IP (lpd) for printing TCP/IP (http) for WebTools TCP/IP for Fiery utilities Windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 20
Network Key to setup: 1 Windows computer 2 Fiery X3e Setup Windows computers using Windows printing User Software Installation Guide Chapter 4 Another supported protocol Fiery X3e installed in the copier/printer 2 TCP/IP (nbt) Windows computer 1 Windows computer 1 Windows computer 1 TCP/IP (nbt - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 21
2-17 User Software Installation Guide, Chapter 4 page 2-6 Another supported protocol Fiery X3e installed in the copier/printer 2 UNIX server or workstation 1, 3 TCP/IP (lpd, http, and ipp) TCP/IP client PC 4 TCP/IP (lpd) protocol Windows computer with TCP/IP loaded 5 Printing on this network - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 22
setup: 1 Fiery X3e Setup 2 Windows computer Fiery X3e parallel port connection Chapter 4 Printing Guide With the parallel port enabled, the Fiery X3e can accept and print jobs sent to its parallel port Parallel A supported network protocol Fiery X3e installed in copier/printer 1 Parallel input - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 23
11-11 Connecting network cable to the Fiery X3e Connecting network cable to the Fiery X3e In this section, the back panel of the Fiery X3e is illustrated, followed by information for connecting to the Ethernet board. Back view of the Fiery X3e Parallel Port RJ-45 Ethernet (10/100Base T) Power Switch - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 24
into the RJ-45 socket on the Fiery X3e. NOTE: The 100BaseT type supported by the Fiery X3e is 100BaseTX, also known as Fast Fiery X3e can accept print jobs from a Windows computer Fiery X3e with Command WorkStation or other Fiery utilities. TO USE PARALLEL CABLE 1. With the Fiery X3e and the Windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 25
print directly to the Fiery X3e. If the computer shares the printer over the network, it is acting as a print server to Windows clients. Client computers print to the Fiery X3e by printing to the Windows NT 4.0/2000/Server 2003 print server. You can then monitor and control printing at the Windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 26
, install the appropriate printer driver files on the Windows NT 4.0/2000/Server 2003 server. For more information, see the User Software Installation Guide. • Repeat the installation for all users who print to the Fiery X3e. Each server and workstation running the Fiery utilities with TCP/IP also - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 27
on the network (see page 2-5). • Enter the host name and remote printer name of the Fiery X3e in the printer connection. For more information, see page 2-18. • If the Windows NT 4.0/2000/Server 2003 server is also a workstation, install Fiery utilities (see the User Software Installation Guide). - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 28
an /etc/hosts file or equivalent host name database on a UNIX workstation on your network, we recommend you use the same host name here as you used for the name of the remote printer in the /etc/printcap file. 2. Perform Fiery X3e Setup to support TCP/IP printing. Enter the options in Protocol Setup - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 29
printer driver files, which give your applications access to printer features. You can use the installation instructions in the User Software Installation Guide for every workstation that will print directly and independently to the Fiery X3e. However, if you are an administrator running a Windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 30
to set it up, the Add Printer Wizard dialog box appears. Follow the procedures in the User Software Installation Guide. • For Windows NT 4.0/2000/XP/Windows 2000 Server clients: Before printing, connect to the print server computer and select the Fiery X3e. Right-click and choose the Open command - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 31
Networks). • In the Windows Network Control Panel, verify the Workgroup name of the computer. Make sure that the Workgroup name is the same as the one listed in Fiery X3e Setup. • For Windows 98/Me, in the File and printer sharing for Microsoft Network Properties dialog box, specify Automatic or - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 32
are outlined in this chapter, client printing setup is described in the User Software Installation Guide, and printing is described in the Printing Guide. The Fiery X3e can receive print jobs from NetWare clients over Ethernet network topologies. During Fiery X3e Setup, you select the frame type - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 33
The Fiery X3e looks for print jobs on one NetWare print server per bindery server. • Each print server can store jobs for any print connection on the Fiery X3e. Overview of IPX printing to the Fiery X3e NetWare file servers support the creation of print queues, which are storage areas for print jobs - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 34
set the bindery context (see page 2-12). • For NetWare in bindery emulation, set up a file server, print server, and print queue for the Fiery X3e (see page 2-13). With bindery services, you can route all Fiery X3e print jobs through the same NetWare file server, or you can configure more than one file - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 35
Service Setup PServer Setup and Bindery Setup Add FS (up to 8) Set Polling Interval Install user software. For printing: Connect client to PQs that you set up on the NetWare FS (associated with the PS selected in Bindery Setup). For running Fiery utilities: Configure the connection to the Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 36
Fiery X3e, you are mainly concerned with defining a printer, a print server object, and one or more print printing to the Fiery X3e, the network administrator must do the following: • Determine the Directory Services path to the container in which the print server and the print queue for the Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 37
On Windows NT 4.0/2000/XP/Server 2003 workstations, install Client Services for NetWare. Use the CSNW option in the Control Panel to set printing options and specify a preferred NetWare server. • Setting up the Fiery X3e as a PostScript printer by installing a PostScript printer driver and the Fiery - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 38
NDPS Manager and a Printer Agent, which control the tasks previously handled by a print queue, print server, and spooler. You can also make the printer driver available for clients to download from Windows 98/Me and Windows NT 4.0/2000/XP/Server 2003 computers. During Fiery X3e Setup, you select the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 39
have enabled TCP/IP and LPD printing on the Fiery X3e. You can ping the Fiery X3e to verify that TCP/IP communication is successful. Setting up the Fiery X3e printer driver You first need to create a directory for Windows NT 4.0/2000/XP/Server 2003 or a folder for Windows 98/Me in the NetWare server - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 40
. You can then convert the printer to Controlled Access if necessary. For more information, see your NetWare documentation. TO SET UP THE FIERY X3E AS A PUBLIC ACCESS PRINTER 1. In NetWare Administrator, double-click the NDPS Manager object you created. 2. In the Details window for the NDPS Manager - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 41
of the Fiery X3e. 9. For Printer Name, enter the name of the Fiery X3e print connection you want users to print to, and click Finish. This name must be either print or hold. 10. In the Select Printer Drivers dialog box, select the printer driver for Windows 9x/Me and the driver for Windows NT - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 42
to the Fiery X3e over TCP/IP. Enter the remote printer name when you set up your Windows NT 4.0/2000/Server 2003 printer, as the "Name of printer or print queue on that (lpd host) server" in the Add LPR Compatible Printer dialog box. For the Windows 2000/XP/Server 2003 printer driver, enter the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 43
network, including the Fiery X3e, must have a unique 32-bit internet address (IP address). Contact your network administrator to obtain an address for the Fiery X3e. Workstations on a TCP/IP network can print directly to the Fiery X3e as a remote printer, or can print to a Windows NT 4.0/2000/Server - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 44
to the Fiery X3e. • Windows NT 4.0/2000/XP/Server 2003 users with the TCP/IP protocol loaded can send print jobs to the Fiery X3e from their applications or from a command prompt. When Windows NT 4.0/2000/XP/Server 2003 users print from applications, they can set print options with the driver but - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 45
to download fonts and files directly to the Fiery X3e. For more information on these job management tools, see the Job Management Guide. Even without the Fiery utilities, you can: • Set up the Fiery X3e to print a log of printed jobs automatically after every 55 jobs. • Print a Job Log manually at - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 46
- Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 47
is the recommended level of control. NOTE: The term "job management tools" is used in this manual to refer to Command WorkStation, Command WorkStation LE, and Fiery Spooler. Fiery X3e print connections The Fiery X3e supports three print connections: Hold queue, Print queue, and Direct connection - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 48
the Job Management Guide). Print queue This is the standard Fiery X3e queue. Jobs sent to the Print queue are processed and printed in the NOTE: The Direct connection is not supported for LPR printing. Jobs sent to the Direct connection are not stored on the Fiery X3e hard disk drive, and cannot be - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 49
Fiery X3e of all job data, performing calibration, defining default color profiles, and setting default values for print options. When performing a function from the Fiery X3e Control Panel that prompts you for the Administrator password, you must enter it promptly. Otherwise, the Fiery X3e Control - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 50
Fiery X3e Setup WebTools The Fiery X3e supports Internet or intranet access with WebTools from Windows and Mac OS computers. To enable use of WebTools, you must do the following in Setup: • Enable TCP/IP. • Set an IP address, subnet mask, and gateway address for the Fiery X3e. • Enable Web Services - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 51
information, see Chapter 5. NOTE: WebSetup is supported on Windows computers only. Installer The Installer WebTool allows users to download installers for printer drivers directly from the Fiery X3e. It is not affected by passwords. For more information, see the User Software Installation Guide. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 52
administrator or operator (Minimum control-not recommended) All users have equal access to all system functions including Setup, clearing the Fiery X3e, deleting printer fonts, setting the WebLink address, performing calibration, printing to all Fiery X3e print connections, and managing all - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 53
password √ √ √ About Setup Setup configures the Fiery X3e to communicate with other devices and manage print jobs. You must perform Setup the first time you turn on the Fiery X3e after new system software is loaded, or any time Server software is reinstalled. An initial Setup using default - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 54
for Windows printing, also known as SMB printing. NOTE: The Fiery X3e does not support the Windows 2000/Windows 2003 Server Active Directory Service. When you use the Fiery X3e in a Windows 2000 server environment, assign the Fiery X3e to a Domain or Workgroup. Ensuring the copier/printer connection - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 55
is functioning normally. 2. Turn off the copier/printer and connect the interface cable from the copier/printer to the Fiery X3e. 3. To confirm this connection, turn on the copier/printer and the Fiery X3e, and print a Test Page from the Fiery X3e Control Panel. To print a Test Page, press the Menu - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 56
- Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 57
Setup, you (or the service technician who loads the software) choose the language for Fiery X3e Control Panel menus and messages. If you do not configure a particular Setup option, the Fiery X3e uses default settings. Make sure the settings are appropriate for the printing environment at your site - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 58
There are two Control Panels for the Fiery X3e. One for the copier and one for the printer. Both are located on the front of the copier/printer and allow you to set options and view information about jobs printed to the Fiery X3e. It comprises the following parts: • Display window-shows status - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 59
44-3 Fiery X3e Control Panel Fiery X3e Control Panel Use the Fiery X3e Control Panel supported at your site, either the copier or printer, to view status information, print special pages, and set up printing. While most elements in the Control Panel display have counterparts in Command WorkStation, - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 60
IS READY 1. Make sure the information screen on the Control Panel reads Ready. If Printing or RIPping appears, the Fiery X3e is processing, and you must wait until the system finishes and reaches the Idle state. 2. Press the Utility button on the copier Control Panel. 3. In the Touch Panel, press the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 61
44-5 Fiery X3e Control Panel Types of Setup screens There are two types of Setup options: Multiple choice questions You are given choices (for example, Yes or No, or a list of options from which to choose). Only one choice is displayed at a time. The currently selected (or default) value appears - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 62
from the Control Panel Server Setup options The Server Setup menu lets you specify system information that pertains to the Fiery X3e and all users. To access the menu, follow the instructions on page 4-4. When you choose Server Setup, the options appear in sequence, as follows. Default values, where - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 63
then enter their group name and password when they print. No Account Printing Disable/Enable [Disable] Specify whether to enable account printing. If No Account Printing is set to Enable, you can print without entering an Account Number. In this case, the Fiery X3e sends the job as account number - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 64
Printed queue. Jobs in the Printed queue take up space on the Fiery X3e hard disk drive. If disk space is low, use a smaller value for saved jobs. Clear Each Scan Job After 1 day/Manually Enable Mailbox Passwords Yes/No [Yes] Select Yes to allow users to access mailboxes with passwords. Preview While - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 65
item. Default values, where applicable, appear in this manual with square brackets. You should display and select options only for the network systems that are currently used at your site. If your network requirements change, you can change Network Setup at any time. If the Fiery X3e is configured - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 66
Setup AppleTalk printing (PAP) is enabled automatically LPD Setup Web Services Setup Windows Setup Port 9100 Setup IPP Setup (Windows 9x/Me/2000/XP) PServer Setup (NDS, Bindery, or both) - TO ACCESS NETWORK SETUP OPTIONS 1. Confirm that the network cable is connected to the Fiery X3e. During Network - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 67
service settings, choose Exit Network Setup. 2. Choose Yes when prompted to save changes. 3. From the main Setup menu, choose another Setup or choose Exit Setup. Network Setup Port Setup Port Setup options You can enable Ethernet and parallel communication simultaneously. To configure the Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 68
want to print through the parallel port. You can connect a single Windows computer to the parallel port and print directly to the Fiery X3e. Port , the Fiery X3e uses the parallel port timeout value to determine when the end of the file has been reached. If you experience printing problems, set - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 69
mean your network has no zones, or the network cable is not connected (see Appendix A). Choose OK (copier) or Set (printer) to dismiss the message. TCP/IP Setup options To configure the Fiery X3e for TCP/IP, choose TCP/IP Setup. Choose Ethernet Setup and enter the appropriate settings. Choose each - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 70
Fiery X3e over Ethernet cabling. NOTE: If you are using TCP/IP for printing from Windows computers, enabling TCP/IP here also enables you to use Fiery utilities from Windows assign the Fiery X3e a static IP address. If you select No, you proceed to the IP Address option, where you manually set the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 71
. This IP address, unlike an IP address set automatically, remains the same if you restart the Fiery X3e. You must change the default to a valid address for your network. For information about setting up printing with TCP/IP, see Chapter 2. Subnet Mask This option lets you modify the subnet mask for - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 72
44-16 Performing Setup from the Control Panel Network Setup Protocol Setup DNS Setup DNS Setup DNS Setup Enable DNS Yes/No [No] Select Yes to allow the Fiery X3e to resolve a name to an IP address. This option must be enabled to use PrintMe services. Get DNS Automatically Yes/No [No] Auto DNS IP - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 73
. Using IP Port Setup options, you can close unnecessary ports and help reject inbound access from the network. IP Filtering By default, the Fiery X3e permits all IP addresses. To control access, you can set an IP address or a range of IP addresses. Enable IP Filtering Yes/No [No] Select Yes to - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 74
44-18 Performing Setup from the Control Panel Add Filter IP Filter Type IP Address/IP Range the filter policy. IP Port Setup All ports not listed in the following setup options are closed. Supported protocols are listed in parenthesis after the port number. Configure IP Ports Yes/No [Yes] Select Yes - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 75
(Fiery utilities and printer driver Two-Way Communication feature) IPX/SPX Setup options To specify the frame types the Fiery X3e uses for IPX/SPX protocols, choose IPX/SPX Setup from the Protocol Setup menu. You must choose at least one frame type to enable IPX/SPX protocols. The Fiery X3e supports - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 76
protocol And these printing services This frame type is automatically enabled AppleTalk TCP/IP with Ethernet PAP (Printer Access Protocol) LPD (Line Printer Daemon) Ethernet SNAP Ethernet II Select Frame Types Enable IPX Auto Frame Type Yes/No [No] Specify whether the Fiery X3e should try to - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 77
PServer is a program in the Fiery X3e software that services the Novell print queues assigned to the Novell print servers set up for printing to the Fiery X3e. When you choose PServer Setup and enable PServer, you can set up NDS (Novell Directory Services), Bindery Services, or both. NDS is used - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 78
from the Control Panel Network Setup Service Setup PServer Setup NDS Setup Before entering NDS settings, make sure the Fiery X3e is connected to the network and that you have configured an NDS directory tree with a Printer, Print Server, and one or more Print Queue objects for Fiery X3e jobs (see - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 79
No [No] Select No if no password is required to browse the tree. You can proceed to navigate to the Print Server object. Select Yes if network displayed if you selected Yes for the previous option. Choose OK (copier) or Set (printer) and browse the NDS tree, as described in the following paragraphs. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 80
Performing Setup from the Control Panel Enter Password Enter the login password for the NDS tree, using the up and down arrow buttons to select characters, and the left and right arrow buttons to move the cursor. Choose OK (copier) or Set (printer). Navigate NDS Tree to the Print Server. Navigate to - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 81
in which the Fiery X3e print connections have been defined. This makes the search more efficient. Select Entire NDS Tree if the tree is small. Select Specif. Subtree to restrict the search and specify the subtree. If you select Entire NDS Tree, choosing OK (copier) or Set (printer) returns to PServer - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 82
in bindery emulation) with a Print Server and a Print Queue for Fiery X3e jobs. Before entering bindery settings, be sure the Fiery X3e is connected to the network and the NetWare file server is running. If Guest Login is not supported, you need a valid user name and password. NOTE: The terms NetWare - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 83
of file servers that have already been selected to communicate with the Fiery X3e. • Edit Connection-lets you change the NetWare Print Server that will print to the Fiery X3e. • Remove File Server-lets you disconnect the Fiery X3e from a file server to which it is currently connected. Remove a file - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 84
from the Control Panel Network Setup Service Setup print server and print queue to handle Fiery X3e print jobs. Enter First Letters of Server Name Use the up and down arrow buttons to enter the first letters of the name of the file server you want to use, and then choose OK (copier) or Set (printer - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 85
in to your NetWare file server. NetWare Print Server Print Server Name Select the name of the print server that you configured in the NetWare utility PCONSOLE. This print server will route print jobs to the Fiery X3e from computers on IPX networks. Print Servr Password This option appears only if your - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 86
Service Setup PServer Setup Bindery Setup View Server List Supported servers This option allows you to view the list of file servers currently connected to the Fiery X3e-that is, servers you have added in Bindery Setup. You are notified if there are none. When you choose OK (copier) or Set (printer - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 87
appears only if your NetWare print server is password-protected. Enter your print server password. The Bindery Setup menu is displayed again. You can edit other connections, choose another Bindery Setup option, or choose Exit Bindery Setup. Remove File Server Remove support for File server name This - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 88
network so that Windows clients can print to a particular print connection (Hold, Print, or Direct) on the Fiery X3e without any other networking software. For information on setting up a Windows computer for Windows printing, see the User Software Installation Guide. Windows printing runs via TCP - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 89
or BOOTP as the protocol for automatically obtaining the IP address of the Fiery X3e. Choose Yes and the Fiery X3e uses a WINS name server and automatically obtains its IP address. Make outside the scope of this manual. To find out if a name server is available, contact your network administrator. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 90
. Point and Print Drivers PS/PCL [PS] PnP Drivers PS/PCL [PS] Select the type of driver to download when setting up a printer for Windows printing. Server Name Default Name The server name is the name that will appear on the network for accessing the Fiery X3e via SMB. The default name is the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 91
choice and workstation requirements, see the User Software Installation Guide. Network Setup Service Setup IPP Setup IPP Setup Enable IPP Yes/No [Yes] Select Yes to enable printing with the Internet Printing Protocol (IPP). You must enable Web Services. For information on setting up user computers - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 92
Fiery X3e at Port 9100 to download a print job. Port 9100 Queue Direct/Print Queue/Hold Queue [Print Queue] Specify the Fiery X3e print connection for downloading jobs to Port 9100. Only the print connections you have enabled in Printer Setup are available. E-mail Setup Enable E-mail Services Yes - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 93
Remote Diagnostics Yes/No [No] Remote Diagnostics Yes/No [No] Enabling this option allows the service technician to remotely run diagnostics through e-mail. Contact your authorized service/support center for more information. RD Outgoing Server 127.0.0.1 This option appears only if you have selected - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 94
com, the user name is pat. RD Admin Domain Name yourdomain.com This option appears only if you have selected Yes to the previous option, Enable Remote Diagnostics. Enter the name of the Fiery domain where the administrator has an account. This is typically the part of the e-mail address that follows - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 95
, which is not necessarily the same as User Name. Password Enter the password for the e-mail account. Administrator E-mail User Name Admin. User Name Enter the administrator name of the administrator e-mail account. This is typically the part of the e-mail address that precedes the @ symbol. For - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 96
to e-mail, the e-mail service sends an error message to that administrator e-mail address. The administrator can authorize additional e-mail addresses as administrators from this e-mail address. Timeout (sec) 30-300 [60] Enter the length of time, in seconds, the Fiery X3e should try to connect to - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 97
(sec) 0-999 [0] Enter the length of time, in seconds, that the Fiery X3e should try to connect to each proxy server before determining that the connection is to Enable Proxy Setup. Proxy Server User Password Enter the user password for the proxy server. This option appears only if you have selected - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 98
from the Control Panel Network Setup Service Setup SNMP Setup SNMP Setup Enable SNMP Yes/No [Yes] This option enables the SNMP communication over a TCP/IP or IPX connection. Selecting No disables any access to remote Setup through Fiery WebSetup and Command WorkStation. SNMP Read Community Name - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 99
Printer Setup. 2. Enter the options appropriate to the printing requirements at the site. 3. When you have finished, save changes. In the following list of options, default values, where applicable, appear in brackets. NOTE: For users to use the Fiery utilities and WebTools or print to the Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 100
allows users to print (or download) jobs to the Print queue. Jobs that are printed to the Print queue are spooled to the Fiery X3e disk and printed on a first-in, first-out basis. Only queues published in the Printer Setup are available to users. NOTE: To print to the Fiery X3e over the parallel - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 101
Paper Sizes option. For example, if Convert Paper Sizes is set to Letter/11x17->A4/A3, and Default Paper Sizes is set to US, then jobs are printed A4/A3 size. This also includes Fiery X3e system pages such as e-mails and images received by Internet Fax, the Start Page, Test Page, and Job Log. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 102
46 Performing Setup from the Control Panel Color Mode CMYK/Grayscale [CMYK] Default Color Mode CMYK/Grayscale [CMYK] Specify whether to print color (CMYK) or Grayscale images to the Fiery X3e by default. CMYK gives you full color prints. Select CMYK as the Color Mode before performing calibration on - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 103
are unavailable when you download files to the Fiery X3e, or when you print a document for which you do not have the corresponding printer font. If this option is set to No, jobs with fonts that are unavailable on the Fiery X3e hard disk generate a PostScript error and do not print. This setting does - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 104
defaults to control printer output. These defaults can be overridden by the user from within an application, but they determine how a job will be printed in the absence of other information. NOTE: PCL printing is supported for Windows computers only. Mac OS computers must use the PostScript driver - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 105
A6/A5/A4 [Letter in the United States, A4 elsewhere] Specify the default paper size that the Fiery X3e uses to print PCL jobs. Default Orientation Portrait/Landscape [Portrait] Orientation Portrait/Landscape [Portrait] This option determines whether the text or image will be oriented along the short - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 106
any changes. Color Setup options Color Setup allows you to set defaults the Fiery X3e uses to control color output. Mac OS and Windows users who use the printer drivers provided on the User Software CD can override most of these defaults on a job-by-job basis. However, users printing from UNIX or - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 107
EFIRGB/sRGB (PC)/Apple Standard/None [EFIRGB] The RGB source is the color space used to control color for conversion from monitor to printed output. EFIRGB is based on the reference points used in the creation of the Fiery X3e software. sRGB is based on an average of a large number of PC monitors - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 108
simulations, see the Color Guide. CMYK Simulation Method Quick/Full (Source GCR)/Full (Output GCR) [Full (Output GCR)] CMYK Sim. Method Quick/Full (Source GCR)/Full (Output GCR) [Full (Output GCR)] Quick simulation assumes that the copier/printer toners match the printer's inks, and all changes - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 109
to Off, black text and graphics knocks out color backgrounds. Generally this option should be Text or Text/Graphics. For more information, see the Color Guide. Spot Color Matching On/Off [On] With this option On, the Fiery X3e uses an internal lookup table to print the best equivalents of PANTONE - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 110
allows them to send jobs to a specific printer from any location. PrintMe supports most common documents in their native format such as Microsoft Word and Adobe PDF, and you can print these files from your Blackberry, wireless laptop, or PDA, without any cables, drivers, or complex setup. NOTE: To - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 111
in the Fiery X3e Print, Hold, and Printed queues. Clear Server also clears the Job Log, all jobs archived on the Fiery hard disk drive, the index of archived jobs, and all FreeForm masters and the index of FreeForm masters. • Factory Defaults clears all queued jobs and resets the Fiery X3e Setup - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 112
or the Fiery X3e. You can print the Job Log from the Control Panel or from the job management tools. The printed Job Log lists accounting information about each job, including user name, document name, time and date printed, and number of pages. Windows and Mac OS users can enter job-specific notes - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 113
Job Log from the Fiery X3e or from a remote workstation, the Fiery X3e saves a record of all jobs. NOTE: If Auto Print Job Log is set Default Paper Sizes setting in PS Setup. If the Default Paper Sizes setting is US, the Job Log is printed on Tabloid or Letter size paper, with Tabloid the default - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 114
if you specified an email address, you will receive the Activation Password by e-mail. NOTE: This password can only be used with the Fiery X3e system ID that you specified during activation. It cannot be with any other Fiery X3e, even if it is the same model. 3. At the Fiery X3e Control Panel, in the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 115
The Fiery X3e restarts and any changes you saved during the Setup take effect. Engine Setup from the Control Admin Mode. Users select No. Administrators select Yes. Administrators will need to provide the Engine Administration Password. From this point on, refer to your copier/printer User Guide - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 116
- Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 117
Setting up the Fiery X3e from a Windows Computer After you perform initial Setup (Server, Network, and Printer Setup) from the Control Panel, you can change most Setup options from a Windows computer. Accessing Setup In addition to using the Control Panel, you can set up the Fiery X3e remotely. You - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 118
55-2 Setting up the Fiery X3e from a Windows Computer TO ACCESS SETUP FROM COMMAND WORKSTATION 1. Start Command WorkStation. 2. Log on as Administrator. 3. Choose Setup from the Server menu. Regardless of how you access Setup remotely, the following dialog box appears. NOTE: The interface of remote - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 119
55-3 General Setup options General Setup options You can specify Fiery X3e system settings that affect all users, such as the name of the Fiery X3e, system date and time, passwords, and Job Log printing. Server Name. -Specify a name for the Fiery X3e. This is the name that appears in the Chooser on - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 120
must then enter their group name into the Group Name option and their password into the Group Password option to print. Support. -Enter names, phone numbers, and e-mail addresses of contact people at your organization who provide support for the Fiery X3e and the copier/printer. Available from the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 121
. If you do not select this option, the Fiery X3e saves a file containing a record of all jobs ever printed. Since this file takes up space on the Fiery X3e hard disk, clearing the Job Log frees up additional disk space. You can clear the Job Log manually at any time with the job management tools. Job - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 122
• Protocols-including AppleTalk, IPX/SPX, and TCP/IP • Print Services-including LPD printing (TCP/IP), NetWare printing (PServer), Windows print sharing (SMB), HTTP support (WWW), Internet Printing Protocol (IPP) printing, and Port 9100 printing • E-mail Service-specify the Fiery E-mail Service - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 123
55-7 Network Setup Adapters/Ports Ethernet (Port Setup) Enable Ethernet. -Select to connect the Fiery X3e to an Ethernet network. Transmission Speed. -Choose Auto Detect if your network environment is mixed, or choose the speed of the network to which the Fiery X3e is attached (10 Mbps or 100 Mbps). - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 124
Parallel Port (Port Setup) Enable Parallel Port. -Specify whether you want to print through the parallel port. You can connect a single Windows computer to the parallel port and print directly to the Fiery X3e. NOTE: Enabling the parallel port does not conflict with using Ethernet communication - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 125
55-9 Network Setup Protocols You can change AppleTalk, IPX/SPX, and TCP/IP protocol settings for the Fiery X3e. Change these settings on the Protocol1 and Protocol2 tabs. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 126
55-10 Setting up the Fiery X3e from a Windows Computer AppleTalk The current AppleTalk zone is displayed. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 127
55-11 Network Setup IPX/SPX Use this option to specify IPX/SPX frame types. The Fiery X3e supports the following Ethernet frame types for IPX/SPX: Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP. You can also allow the Fiery X3e to select the frame type automatically. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 128
55-12 Setting up the Fiery X3e from a Windows Computer DNS Setup You can enable DNS Setup to allow the Fiery X3e to use the Fiery X3e features and also to resolve a name to an IP address. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 129
Setup TCP/IP Specify TCP/IP settings. The current settings for IP address, subnet mask, and default gateway address are displayed. For information about setting up printing with TCP/IP, see Chapter 2. The Fiery X3e requires a unique, valid IP address. You can set a static address or specify that the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 130
55-14 Setting up the Fiery X3e from a Windows Computer To set the subnet mask, enter one of network has a gateway and users outside the gateway plan to print to the Fiery X3e using TCP/IP, enter the gateway address. NOTE: The Fiery X3e stores assigned IP addresses, even if you later disable TCP/IP - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 131
(see page 5-17). • Windows Print Sharing (SMB)-enable or disable SMB print services. • HTTP Support (WWW)-enable or disable support for Fiery WebTools. • Port 9100-enable or disable support for Port 9100 printing. • E-mail Service-specify the Fiery E-mail Service. • FTP Service-enable or disable FTP - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 132
55-16 Setting up the Fiery X3e from a Windows Computer LPD Printing Enable LPD Print Services. -Select to enable or disable LPD printing services. Enable Web Services. -Select to enable or disable web services. Enable FTP Services. -Select to enable or disable FTP services. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 133
55-17 Network Setup NetWare Printing options Use this option to specify NDS and Bindery services. TO SPECIFY THE NDS TREE SETTING FROM REMOTE FIERY X3E SETUP 1. Select Enable NDS and click Change Trees. 2. In the NDS Configuration dialog box that appears, double-click an NDS tree in the Available - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 134
55-18 Setting up the Fiery X3e from a Windows Computer 3. In the Select User Login window, select Use Default User Information or enter your password, and click Next. 4. Navigate to the NDS container, select it, and click Next. If necessary, enter the password. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 135
55-19 Network Setup 5. Select Use Default Print Queue Root or navigate to the Print Queue Root and click Finish. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 136
55-20 Setting up the Fiery X3e from a Windows Computer 6. Click OK. The NDS Configuration dialog box appears, displaying information about the print server. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 137
BINDERY CONNECTIONS FROM REMOTE FIERY X3E SETUP 1. Select Enable PServer mode from the Service1 tab. 2. Click Bindery Setup. 3. Select a file server from the Available Servers list. If the File Server User Name and Password dialog box appears, enter the appropriate user name and password to log on to - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 138
55-22 Setting up the Fiery X3e from a Windows Computer 4. Select a print server from the list and click Finish. If necessary, enter the appropriate password in the Print Server Password dialog box to log on to the selected file server. The name of the newly added server appears in the Selected - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 139
55-23 Network Setup TO REMOVE BINDERY CONNECTIONS FROM REMOTE FIERY X3E SETUP 1. Select Enable PServer mode from the Service1 tab. 2. Click Bindery Setup. The Novell Setup dialog box appears. 3. Make your selection in the Selected Servers list. 4. With the file server selected in the Selected Servers - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 140
55-24 Setting up the Fiery X3e from a Windows Computer PServer Poll Interval Specify the polling interval (in seconds) for NetWare printing. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 141
55-25 Network Setup Windows print sharing with Server Message Block (SMB) To set up the Windows printing service, text fields may include uppercase letters, numerals, spaces, and the following characters NOTE: Lowercase letters are not allowed, except in the Comment field. - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 142
Fiery X3e from a Windows Computer Enable Windows Printing Service. -Select to enable SMB (Server Message Block), the file and printer sharing protocol built into Windows. Enabling SMB lists the Fiery X3e on the network so that Windows clients can print to a particular print connection (Hold, Print - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 143
address, select this option to allow the Fiery X3e to obtain the IP address automatically for supported browsers and workstation requirements, see the User Software Installation Guide. Enable Internet Printing Protocol (IPP). -Select Yes to enable printing with the IPP. You must enable Web Services - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 144
up the Fiery X3e from a Windows Computer Port 9100 printing Enable Port 9100. -Enables applications to open a TCP/IP socket to the Fiery X3e at Port 9100 to download a print job. Port 9100 Queue. -Allows you to attach Port 9100 to any of the published Fiery X3e print connections. FTP Services Enable - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 145
Diagnostics. -Selecting this option allows the service technician to remotely run diagnostics through e-mail. Incoming Mail Server. -Specify the IP address or server name that communicates the appropriate mail server and contact information to the Fiery X3e. Server Type. -Specify the e-mail protocol - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 146
a Windows Computer Outgoing Mail Server. -Specify the IP address or server name that communicates the appropriate mail server and contact information to the Fiery X3e. NOTE: You must define both an Incoming and Outgoing mail server. If an Outgoing mail server is not defined, the E-mail Service assumes - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 147
options From this dialog box, you can access the Printer Setup and Paper Setup tabs. NOTE: In the following illustrations, "Device name" represents the model of the copier/printer connected to the Fiery X3e, which is 31C-M. Printer connections Specify whether to publish the Print queue, Hold queue - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 148
model of the copier/printer connected to the Fiery X3e, which is 31C-M. Convert Paper Sizes. -Specify whether to convert paper sizes automatically to the default paper sizes specified. For example, if you select Letter/11x17->A4/A3, a letter size job is automatically printed on A4 paper. Color Mode - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 149
Metric paper sizes (for example, A4 or A3) by default. When no paper size is defined within a PostScript file, jobs are printed on Letter-size paper if you select US, or A4 paper if you select Metric. Print Cover Page. -Specify whether the Fiery X3e prints a cover page (job summary) at the end of each - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 150
up the Fiery X3e from a Windows Computer Setting up printing groups The Fiery X3e administrator can arrange users into groups and allow members of a group to print only if they supply a password at print time. This method of printing is known as Printing Groups, or Member Printing. This section - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 151
lost and you must log on again when the server restarts. After you have completed Setup and restarted the Fiery X3e for the first time, install the user software for printing on remote workstations, as described in the User Software Installation Guide. To confirm the network connection and your Setup - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 152
the test page, Job Log, color charts, and Font List. For information on these Fiery X3e pages, see the Job Management Guide. TO PRINT THE CONFIGURATION PAGE 1. In Command WorkStation, choose Print Pages from the File menu. 2. Click Configuration. 3. Click Print. Post the current Configuration page - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 153
from a Windows or Mac OS computer. TO SET UP WEBTOOLS ON THE FIERY X3E 1. In Fiery X3e Network Setup, enable TCP/IP. 2. Set a valid, unique IP address for the Fiery X3e, and then set the subnet mask. Set a gateway address, if required. 3. Enable Web Services. 4. In Fiery X3e Printer Setup, con - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 154
the lower-left corner of the window. 5. Click the name of a particular WebTool. 6. Click Configure to enable specific WebTools for users. Setting up WebTools In order for network users to access and use WebTools, you must set certain Fiery X3e options in Network Setup and Printer Setup. You also must - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 155
the Fiery X3e. The Fiery X3e home page appears. 3. Click the Fiery WebTools icon in the lower-left corner of the window. 4. Enter the Administrator password, if required, and click OK. 5. Press the Control key (Mac OS) or Ctrl key (Windows) as you click WebLink. The Update WebLink dialog box appears - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 156
- Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 157
the Fiery X3e to allow user access to WebTools This manual This manual Release Notes Setting up the printing environment Setting printer defaults, including modes, imaging, paper size handling, error handling Printer Setup, pages 4-43,5-31 PS Setup, pages 4-45 and 5-32 Color Guide Printing Guide - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 158
Management Guide Printing with CMYK simulations Printing color samples and swatch pages Installing color profiles Color Guide User Software Installation Guide Tips Deleting jobs, clearing queues page 7-9, also Job Management Guide Troubleshooting Fiery X3e Setup Appendix A Setting passwords - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 159
, see page 3-3. For information on controlling print jobs with the job management tools, see the Job Management Guide. NOTE: The Operator password can be set and changed only from Fiery WebSetup, local Setup, or Command WorkStation. TO CHANGE THE FIERY X3E PASSWORD 1. Scroll through the main Setup - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 160
Administering the Fiery X3e Passwords You can set, change, and remove passwords for the Fiery X3e. These passwords, specific to the Server process, have different uses than the Windows Administrator and Operator passwords. Keep track of the passwords you set for each. Administrator-Controls access to - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 161
representative to reinstall Fiery X3e system software. This clears the Administrator password and allows you to set a new one. Clearing the Fiery X3e The Clear Server command allows you to clear all queued print jobs from the Fiery X3e-jobs in the Fiery X3e Print, Hold, and Printed queues. Jobs can - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 162
any entry in the Print address book, the job will not print. Instead, the user will receive an e-mail stating that the print job was not accepted. The default wildcard character "*@*" is stored in the Print address book. This allows any user to print to the Fiery X3e until the administrator adds - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 163
mail to the Fiery X3e with command codes in the Subject and Message fields. The Fiery X3e responds by Admin List of addresses in the specified address book Added to Address Book name of address book For example: Added to Address Book Print List of addresses added to the address book. The Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 164
Fiery X3e e-mail services #Help Fiery Fiery X3e also lists any addresses that cannot be deleted and includes the reason Provides troubleshooting e-mail syntax Printing a Configuration page from the Control printer default settings. Other pages you can print from the Control Panel of the Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 165
PAGE 1. Make sure the information screen on the Control Panel reads Idle. If Printing or RIPping appears, the Fiery X3e is processing, and you must wait until the system finishes and reaches the Idle state. 2. Press the Utility button on the copier Control Panel. 3. In the Touch Panel, press the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 166
can leave the Fiery X3e and the copier/printer running all the time. This section describes how to reboot, shut down, and restart the Fiery X3e when necessary. Shutting down and rebooting the Fiery X3e You may need to shut down the Fiery X3e for service, or reboot the entire Fiery X3e system. When - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 167
, rebooting, and restarting the Fiery X3e TO SHUT DOWN THE FIERY X3E COPIER 1. Make sure that no jobs are being processed or printed (confirm that the status is Ready). 2. Press the Utility button on the copier Control Panel. 3. In the Touch Panel, press the Controller Detail button. 4. Press the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 168
THE FIERY X3E COPIER 1. Press the Utility button on the copier Control Panel. 2. In the Touch Panel, press the Controller Detail button. 3. Press the Menu button. 4. Use the down arrow to scroll to Shut Down. 5. Select Reboot System. The Fiery X3e will reboot. TO REBOOT THE FIERY X3E PRINTER 1. From - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 169
Fiery X3e Restarting the Fiery X3e resets the Fiery X3e system software, but does not reboot the entire system. Network access to the Fiery X3e is temporarily interrupted and all currently processing jobs are aborted. TO RESTART THE FIERY X3E COPIER 1. Press the Utility button on the copier Control - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 170
- Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 171
in the Installation and Service Guide for service technicians. Contact your authorized service/support center if you see startup error messages on Command WorkStation or if the Fiery X3e does not reach the Idle state. Troubleshooting during Setup from the Control Panel The following section - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 172
defaults to zero. No NDS trees were found on the Novell network. Check to see that the frame types on the Fiery X3e are properly configured. You have previously connected the Fiery X3e to a different NDS tree. NetWise supports Menu key, or select OK (copier) or Set (printer) and choose No in the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 173
Error. Cannot open bindery connection to NDS server. No NetWare file server found. File server name not found. Try again? Select this server through NDS setup or disable NDS and select it through bindery. No file server was found when Fiery X3e queried the network to create a list of supported - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 174
AA-4 Troubleshooting After this Setup screen This message Means Add Server, Enter Your Login Name, Enter Your File Server Password (Network Setup >Service Setup > PServer Setup > Bindery Setup) No NetWare print server found. No print server was found when Fiery X3e queried the file server you - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 175
Troubleshooting • The Novell network has been configured with at least one print server and queue for the Fiery X3e. • You have the appropriate permissions and login information, including user name and password, if necessary. • The Fiery X3e different login account. The error screen exits to the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 176
AA-6 Troubleshooting Novell error nnn Notify IPX (Novell) Administrator. Cause Suggested action or exit Indicates other network errors when the Fiery X3e is already connected to a file server. Something unexpected has happened and the user generally cannot recover without intervention of the - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 177
Guide. These messages are reported by the job management tools. You can turn on PostScript error reporting as a print option from Mac OS applications. Printer not found Most failures to find a printer on the network are due to conflicting or missing name or address settings for the Fiery X3e - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 178
2-17 lpadmin queuename print queues (must be all lowercase and in English) New Device Server Name - _direct _print _hold Utilities are not supported over IPX/SPX Utilities are not supported over IPX/SPX print or hold - page 2-8 31C-M DNS name (TCP/IP host name) User Software Installation Guide - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 179
, and your Windows directory should contain a configured Efinl.ini file. Cannot connect to the Fiery X3e with Command WorkStation or Command WorkStation LE If there is a problem connecting to the Fiery X3e, an error message is displayed. The problem can occur when: • The Fiery X3e is initially turned - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 180
- Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 181
and software 3-1 accessing Setup from Control Panel 4-2 from Windows computer print jobs 7-1 password 7-2 Administrator E-mail Domain Name option, E-mail Setup 4-39 Administrator E-mail User Name option, E-mail Setup 4-39 Administrator password changing from Control Panel 7-2 changing from Windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 182
Fiery WebTools 6-1 network printing 2-5 to 2-6, 2-13 overview 1-2 CMYK printing by default 4-46 CMYK Simulation Method option 4-52 CMYK Simulation Profile option 4-52 Color Mode option 4-46 Color Setup 4-50 Command WorkStation xi problems connecting to server A-8 Comment option, Windows printing - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 183
4-7, 5-4 Enable PServer option 4-21 Enable TCP/IP for Ethernet option 4-14, 5-13 Enable Web Services option 4-35, 5-27 Enable Windows Printing option 4-32, 5-26 enabling client utilities 4-14 Fiery WebTools 4-35, 5-27 end-of-file (EOF) character, parallel communication 4-12, 5-8 Engine Setup 4-59 - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 184
Server Password (Bindery) 4-29 File Server, Bindery 5-21 file types and parallel port setup 4-12, 5-8 font substitution 4-47, 5-33 frame types supported AppleTalk Fiery WebTools installing server on network 1-2 Internet accessing server with Fiery WebTools 3-4 WebLink access 6-3 Internet Printing - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 185
options 4-10 J Java to support Internet browser 6-1 Job Log clearing automatically 4-57 clearing jobs from 7-5 default options 4-56 defined 4-56 printing automatically 4-56 setting the page size used 4-57, 5-5 Job Log Setup from Control Panel 4-56 from Windows computer 5-5 job management tools de - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 186
1-6 lpd (TCP/IP) 1-3, 1-4, 1-9 protocols supported 1-1 using multiple protocols 1-4 with Windows NT 4.0 1-7 Network Setup exiting 4-11 from Control Panel 4-9 to 4-43 from Windows computer 5-6 to 5-28 part of initial Setup 5-1 troubleshooting A-3 New Password option 7-3 Novell, see NetWare O Operator - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 187
Print to PostScript Error option 4-47, 5-33 Printed queue 3-2, 4-7 printer connection failure A-6 not found A-6 not in Chooser A-6 Printer Agent, NDPS 2-14 Printer Setup from Control Panel 4-43 from Windows computer 5-31 part of initial Setup 5-1 Printed queue options 5-4 printing CMYK by default - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 188
4-17 Server Setup 4-6 Service Setup 4-21 summary 4-1 Setup, configuring the Server xi SMB, see Windows printing Spot Color Matching option 4-53 Start Page, printing 4-6 Status WebTool, see Fiery WebTools Subnet Mask option 4-15 superuser 2-19 Support option 5-4 Supported Servers, Bindery Setup 4-30 - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 189
) option 5-7 troubleshooting Command WorkStation connection problems A-8 connection to printer fails A-6 Printer not found in the selection list of Fiery utilities A-8 Printer not found-TCP/IP or IPX networks A-6 Setup, Control Panel A-1 twisted pair cable 1-12 U UNIX managing print jobs 2-21 - Kyocera KM-C2230 | Fiery X3e 22C-KM Configuration Guide for KM-C2230 - Page 190
Fiery X3e 31C-M Color Server
CONFIGURATION GUIDE