Kyocera TASKalfa 300ci DF-760/MT-720/BF-720/PH-5A Operation Guide - Page 27
Conveyor / Inner Tray, for when output s are
View all Kyocera TASKalfa 300ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English 1 While pushing the finisher release lever, pull the finisher out from the machine. 2 Open the top cover and remove the jammed paper. Conveyor / Inner Tray 3 Close the top cover and re-install the finisher back into position on the machine. If the illustration shown displays on the machine's operation panel, there is a paper jam in the conveyor section to the inner tray. NOTE: If frequent jamming occurs in the conveyor or inner tray, the paper may be excessively curled. Adjust curling referring to page 31 for when output pages are curled. 1 Open the tray C and front cover. 2 Turn the conveyor knob (D2) to the left to feed the paper along to enable easy removal. 3 Follow step 3 onward on page 22 to remove jammed paper. DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 25