LG 29UM65-P Installation Guide - Page 42
Monitor Troubleshooting, Monitor Frequency, Range Exceeded, Product Specifications - refresh rate
View all LG 29UM65-P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
42 Troubleshooting Monitor Troubleshooting EENN한GLG국ISLH어ISH The screen is blank Is the product's power cord connected correctly? •• Check if the power cord is connected correctly to a wall outlet. Is the power lamp on? •• Check the Power button. Is the power on and the power lamp is lit •• Adjust the screen brightness and contrast. either blue or green? Is the power lamp blinking? Do you see the Monitor Frequency Range Exceeded message on the screen? Do you see the Check Signal Cable Connection message on the screen? •• The power lamp blinks when the Internet Monitor is in standby mode. When you press the power button, the monitor turns on again within 2 to 3 seconds. Using a keyboard or mouse does not exit standby mode. •• This occurs when the signal sent by the PC (video card) exceeds the range of horizontal or vertical frequency supported by the monitor, so check the Product Specifications of this manual and change the settings. •• This occurs when the signal cable between the PC and the monitor is not correctly connected or unplugged, so check and reconnect the signal cable. There are afterimages on the screen Are there afterimages on the screen even after turning the monitor off? •• Please be careful as displaying a fixed image on the screen for a prolonged period of time can damage the monitor and leave afterimages on the screen. Use screen savers to extend your monitor's working life. yy NOTE Vertical Frequency yy A monitor screen must be refreshed dozens of times every second like a fluorescent lamp to allow users to see the picture. yy This rate of screen refresh is called the Vertical Frequency or Refresh Rate, and is measured in Hz. Horizontal Frequency yy The time taken to display the full length of a single horizontal line on the screen is called the horizontal cycle. The Horizontal Frequency, measured in kHz, is the inverse of the horizontal cycle and shows the number of horizontal lines displayed on the screen every second. The screen is unstable and shakes. / The screen shows ghost images. Did you set the correct screen resolution? •• Refer to User's Guide > Using the Monitor > Setting the Resolution and set the screen to the recommended resolution.