LG 32SL5B Owners Manual - Page 97
Set ID Lock, Set ID, Auto Set ID, Setting ID Automatically., Do you want to start with 1?
View all LG 32SL5B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
ENGLISH 19 Set ID Setup This feature allows you to set an ID for the product. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Password Change SSeettIDIDSSeteutpup Configuration Setup Lock Mode External Speaker / Audio out Fail Over ISM Method Easy Brightness Control Set ID Setup Set ID Lock Set ID Auto Set ID Reset ID Previous No 1 Press OK Press OK OK S/W : xx.xx.xx.xx Micom : x.xx.x OK Set ID Lock •• You can enable Set ID Lock by selecting "Yes" or cancel Set ID Lock by selecting "No". Set ID •• Pick and enter a number between 1 - 255 (1 - 1000, with some models) for the Set ID. Auto Set ID •• This feature sets an ID for the product automatically. Setting ID Automatically. Do you want to start with 1? (Current Set ID : 1) Yes No •• If you set this feature to Yes, all monitor in the RS-232C daisy-chain are assigned a sequential Set ID, starting with 1. •• If you set this feature to No, Set IDs are assigned to the monitor sequentially, starting with the foremost set. •• A Set ID cannot be decreased from its current value. Therefore, it is recommended that you execute Reset ID before using this feature. •• Execution time may vary depending on the installation environment. •• If the Auto Set ID operation is not completed normally, turn the product off and on, and then try again. •• The Yes/No options only work on the foremost monitor in the daisy-chain. (This feature may not be available with some models.)