LG 42LE5300 Owner's Manual - Page 154

APPENDIX APPENDIX 154 Command Reference List COMMAND1 COMMAND2 01. Power k a 02. Input Select x b 03. Aspect Ratio k c 04. Screen Mute k d 05. Volume Mute k e 06. Volume k f Control 07. Contrast k g 08. Brightness k h 09. Color k i 10. Tint k j 11. Sharpness k k 12. OSD Select k l 13. Remote k m Control Lock Mode 14. Treble k r DATA (Hexadecimal) 00 - 01 ► P.155 ► P.155 00 - 01 00 - 01 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 64 00 - 01 00 - 01 00 - 64 15. Bass k s 00 - 64 16. Balance k t 00 - 64 17. C olor x u 00 - 64 Temperature 18. Energy Saving j q ► P.156 19. Auto j u Configuration 21. Channel Add/ m b Del 22. Key m c ► P.156 00 - 01 ► P.157 23. Backlight m g 00 - 64 20. Channel Tuning COMMAND1 COMMAND2 DATA00 DATA01 (Hexadecimal) (Hexadecimal) m a physical program high major program low DATA02 DATA03 DATA04 DATA05 (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) major low minor high minor low attribute Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set. (j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1-99. When selecting Set ID '0', every connected the TV is controlled. Set ID is indicated as decimal (1-99) on menu and as Hexa decimal (0x0 - 0x63) on transmission /receiving proto- col. [DATA] : To transmit the command data. Transmit the 'FF' data to read status of command. [Cr] : Carriage Return ASCII code '0x0D' [ ] : ASCII code 'space (0x20)' * In this model, TV will not send the status during the standby mode. OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. * In this model, TV will not send the status during the standby mode. * Data Format [Command 2] : Use as command. [Set ID] : Use the small character, if set ID is 10, it will send the '0', 'a'. [DATA] : Use the small character, if data is 0 x ab, it will send the 'a', 'b'. [OK] : Use the large character. Error Acknowledgement [Command2][ ][Set ID][ ][NG][Data][x] The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time * In this model, TV will not send the status during the standby mode. * Data Format [Command 2] : Use as command. [Set ID] : Use the small character, if set ID is 10, it will send the '0', 'a'. [DATA] : Use the small character, if data is 0 x ab, it will send the 'a', 'b'. [NG] : Use the large character