LG 43US340C0UD INSTALLATION - Page 29

»» Type of Connector: D-Sub 9-Pin Male ENGLISH Male connector on box, viewed towards connector. No. Signal 1 VCC 2 RX RS232 3 TX RS232 4 IR from TV 5 GND 6, 8 Not connected 7 2 A 9 1.5 A Signal requirements Standard RS232 specification Standard RS232 specification Power ground +5 V DC 10 %, max 100 mV ripple +12 V DC 10 %, max 100 mV ripple One Channel Map (Depending on model) •• If set to'Enable', the TV will operate as below. -- A. When the TV is auto-scanning, it searches both air and cable channels. -- B. User can assign a channel number him/herself by manual scan. -- C. In 'Channel Edit'window, all channels are shown in a single list regardless of input source. -- D. Automatically scanned channels may not have the user-desired channel numbers. •• If user change the'Enable/Disable'value, an pop-up window will be displayed to warn that all channel will be deleted. The Default value is 'Enable'. DTV Channel Update •• It is a mode to set whether to update DTV Channel automatically or not. •• When set to'Auto', the function to update TV's Channel map according to DTV Channel's stream information. •• When set to'Manual', the function to keep TV's Channel map even though DTV Channel's information is changed. On Timer Operation •• It is a mode to select'Timer Power On'working one time or repeatedly. •• 'Once':'Timer Power On'in the user menu operates only one time when the Timer Power On menu is set to On. •• 'Repeat':'Timer Power On'operates repeatedly when the Timer Power On menu is set to On. USB Auto Playback (Depending on model) •• When'USB Auto Playback'is set to'Movie', TV finds and plays the USB's movie files located at the root(top) directory Movies if USB is plugged in. •• When'USB Auto Playback'is set to'Photo', TV finds and plays the USB's photo files located at the root(top) directory Photos if USB is plugged in. •• If it reaches the last file, it starts the first file again 29