LG 43US340C0UD INSTALLATION - Page 40

Security Key, Wi-Fi Signal Strength, Wi-Fi Channel, Security Type, Radius Server IP, VLAN ID

Get LG 43US340C0UD PDF manuals and user guides View all LG 43US340C0UD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

ENGLISH Security Key •• If you want to change default password, you need to change'Use Default'value into'Disable'. Wi-Fi Signal Strength •• You can control wireless signal strength on SoftAP. This is controlled by 5 step. If you select'Not Used', wireless signal strength will be set to Max value. Wi-Fi Channel •• You can control wireless channel on SoftAP mode. This is controlled from 1 to 11 channel. If you select'Auto', wireless channel of SoftAP will be set to random channel. Mode (Depending on model) •• You can select NAT(Network address translation) mode and BRIDGE mode for Soft AP. Security Type (Depending on model) •• You can select'WPA2-PSK','WPA2-Enterprise'and'Open'if you selected'BRIDGE'mode. Radius Server IP, Radius Server Port, Radius Server Key (Depending on model) •• You should enter Radius Server information if you selected'WPA2-Enterprise'. VLAN ID (Depending on model) •• SoftAP VLAN ID is needed when you want to separate TV packets and SoftAP packets. •• The packets via SoftAP are tagged when the packets go through LAN port to external network. •• It is not compatible with Network -> VLAN ID. (SoftAP VLAN is not available if LAN port or AUX port in VLAN ID is set.) 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
ENGLISH
40
Security Key
•
If you want to change default password, you need to change ‘Use Default’ value into ‘Disable’.
Wi-Fi Signal Strength
•
You can control wireless signal strength on SoftAP. This is controlled by 5 step. If you select ‘Not Used’, wireless signal strength will be set to Max
value.
Wi-Fi Channel
•
You can control wireless channel on SoftAP mode. This is controlled from 1 to 11 channel. If you select ‘Auto’, wireless channel of SoftAP will be
set to random channel.
Mode
(Depending on model)
•
You can select NAT(Network address translation) mode and BRIDGE mode for Soft AP.
Security Type
(Depending on model)
•
You can select ‘WPA2-PSK’, ‘WPA2-Enterprise’ and ‘Open’ if you selected ‘BRIDGE’ mode.
Radius Server IP, Radius Server Port, Radius Server Key
(Depending on model)
•
You should enter Radius Server information if you selected ‘WPA2-Enterprise’.
VLAN ID
(Depending on model)
•
SoftAP VLAN ID is needed when you want to separate TV packets and SoftAP packets.
•
The packets via SoftAP are tagged when the packets go through LAN port to external network.
•
It is not compatible with Network -> VLAN ID. (SoftAP VLAN is not available if LAN port or AUX port in VLAN ID is set.)