LG 50PC1DR Owners Manual - Page 12
Important Note - y sus
View all LG 50PC1DR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Important Note Troubleshooting • The following voltages and waveforms should be adjusted in the order they are presented. • Always adjust the DC levels before the waveform adjustments to most accurately set the Plasma Display Panel. Voltmeter Adjustments to Y SUS • VSC 115v Used to shape the Y Drive waveform by setting the V Scan level. Measured at the VSC test points. • -VY -196v Used to shape the Y Drive waveform by setting the negative excursion of the V Set Check Y Sustain Board Output Voltage with the Voltmeter make sure the -VY and VSC are the same as the Voltage Label on the upper right side of the PDP. Check VSC Check -VY Plasma Display Panel Troubleshooting - 2007 12
12
Plasma Display Panel Troubleshooting - 2007
Important Note
•
The following voltages and waveforms should be adjusted in the order they are presented.
•
Always adjust the DC levels before the waveform adjustments to most accurately set the Plasma
Display Panel.
Troubleshooting
Voltmeter
Adjustments
to
Y
SUS
•
VSC
115v Used to shape the Y Drive waveform by setting the V Scan level. Measured at the
VSC test points.
•
-VY
-196v Used to shape the Y Drive waveform by setting the negative excursion of the V Set
Check Y Sustain Board Output Voltage with the Voltmeter make sure the -VY and VSC are the same
as the Voltage Label on the upper right side of the PDP.
Check VSC
Check -VY