LG A900BM Owners Manual - Page 16

Maintenance Emptying the Dust Bin 1 Remove the battery from the unit before cleaning the dustbin. 2 Hold the dust bin over a wastebasket or trash can. 3 Press the release button at the bottom front of the dust bin to open the bin and shake to empty it. • Be careful as dust/foreign matter may spill out when you open the dustbin. Release button 4 Insert the crevice tool into the large dust separator and turn it counterclockwise to remove it. 5 Rinse the large dust separator under running water and allow to dry completely before reinstalling. • Be sure to dry the separator completely before using it. Large dust separation device (Cyclonic Mesh Filter) 6 With the dust separator removed, use the combination tool to clean out the dust inside the dustbin. Combination Tool WARNING • Never wash the product body with water. Water may reach the motor and cause electric shock or fire. • Do not apply force or any impact to the dust bin parts or the dust separator as it may damage them. • Reassemble the dust separator before using the product. Failure to do so will damage the product. Cleaning the Filters The pre-filter and exhaust filter need to be cleaned at least once a month to maintain the cleaning performance of the product. The frequency of cleaning depends on where and how often you use the product. Clean the filters more often if used in areas with a lot of dust. 1 Turn the outer exhaust filter counterclockwise to remove it. Lift out the pre-filter by the handle. Exhaust filter Pre-filter 2 Use the brush attachment to clean off the motor inside the filter compartment. Do not use water. Combination Tool 16