LG A912PM Owners Manual - Page 14
Caution
View all LG A912PM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
us_main.book.book Page 13 Tuesday, March 16, 2021 10:31 AM CAUTION • Keep fingers away from pinch points when assembling the appliance or the charging station. INSTALLATION 13 3 Assemble the charging station onto the top of the floor stand pipe. ENGLISH 4 Connect the power adapter to the port on the back of the charging station. NOTE • The charging station can be removed as needed. To remove it, hold the floor stand dock steady and pull up on the charging station. 1 Place the floor stand dock on a hard and level floor and assemble the floor stand pipe. 5 Drill a hole in the wall and insert the drywall anchor b if needed. • Before drilling, make sure that there are no pipes or electrical wires inside the wall at the desired location. • For drywall anchor: use 1/4″ (6.5 mm) drill bit • For concrete or wall stud: use 1/8″ (3 mm) drill bit • If screwing into drywall, use the drywall anchor. 2 Clip the power cord tidily into the cord keeper a on the back of the floor stand pipe. 6 Align the wall anchoring block c of the charging station, and fix the charging station to the wall by tightening the anchoring screw d all the way.