LG A912PM Owners Manual - Page 23

us_main.book.book Page 22 Tuesday, March 16, 2021 10:31 AM 22 MAINTENANCE sunlight for at least 24 hours before reassembling. 4 Use the combination tool d to clean any dust off the motor. • Do not wash the motor with water. 7 Insert the clean, dry pre-filter and rotate the exhaust filter to the locked position e to reassemble it on the product body. 5 Clean the exhuast filter by brushing the dust off it regularly and wash it in running water at least once a month. • To avoid odor and the malfunction of the motor, allow the exhaust filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling. 6 Clean the pre-filter by brushing the dust off it regularly and wash it in running water at least once a month. • To avoid odor and the malfunction of the motor, allow the pre-filter to dry completely in a well-ventilated area out of direct CAUTION • Do not use the appliance without the exhaust filter and pre-filter installed. Doing so could result in product damage. Cleaning the Nozzle Clean the nozzle and rotating brush regularly. CAUTION • Always separate the nozzle from the product body or remove the battery before cleaning. If the nozzle starts to operate during cleaning, it could cause an injury. • Keep fingers away from pinch points when assembling the nozzle on the appliance or the rotating brush on the nozzle. • Do not use the rotating brush as a wet mop. Doing so may cause product damage. Cleaning the Universal/Hard Floor Nozzle Clean the brush and roller heads before each use. • If the brush contains foreign objects, the brush may not spin or a noise may occur during operation.