LG A926KSM Owners Manual - Page 13

ENGLISH 3 Slide the detachable nozzle storage onto the floor stand pipe. • Make sure not to pinch or tangle the power cord behind the mop pads storage. INSTALLATION 13 7 Align the wall anchoring block c of the charging station, and fix the charging station to the wall by tightening the anchoring screw d all the way. 4 Assemble the charging station onto the top of the floor stand pipe. 5 Connect the power adapter to the port on the back of the charging station. 8 Plug the power cord into the power outlet. Using Double-Sided Tape to Secure the Appliance 1 Use the double-sided tape a to attach the wall anchoring block b to the charging station. • Remove the center section of double-sided tape before attaching it to the wall anchoring block. 6 Drill a hole in the wall and insert the drywall anchor b if needed. • Before drilling, make sure that there are no pipes or electrical wires inside the wall at the desired location. • For drywall anchor: use 1/4″ (6.5 mm) drill bit • For concrete or wall stud: use 1/8″ (3 mm) drill bit • If screwing into drywall, use the drywall anchor. 2 Attach the second piece of double-sided tape to the other side of the wall anchoring block to secure it to the wall. • Do not use double-sided tape on wallpaper.