LG A926KSM Owners Manual - Page 14

14 INSTALLATION Wall-Mounted Installation For wall-mounted installations, the charging station must be attached securely to the wall using the provided (short) wall anchoring screws. • The detachable nozzle storage cannot be attached to the charging station in a wallmounted installation. 1 Connect the power adapter to the port on the back of the charging station. 2 Drill 2 holes and insert the drywall anchors (if needed) at least 3.25 ft (1 m) from the floor and near enough to easily reach a power outlet. • Before drilling, make sure that there are no pipes or electrical wires inside the wall at the desired location. • For drywall anchor: use 1/4″ (6.5 mm) drill bit • For concrete or wall stud: use 1/8″ (3 mm) drill bit • If screwing into drywall, use the drywall anchors. 4 Plug the power cord into the power outlet. Compact Installation For safety and convenience, install the charging station using the self-standing or wall-mounted installation methods. If you choose not to install the charging station, place it on a level floor for charging or storage. 1 Connect the power adapter to the port on the back of the charging station. 2 Place the charging station on a hard and level floor. 3 Separate the extension pipe and nozzle from the product body before charging or storing the appliance. 4 Plug the power cord into the power outlet. 
GU 3 Attach the charging station to the wall with the wall anchoring screws.