LG DLGX0002TM Owner's Manual - Page 28

HOW TO USE THE LCD DISPLAY The display shows the settings, estimated time remaining, options, and status messages for your dryer. When the dryer is turned on, the light in the display will illuminate. 6 78 9 5 CHILD LOCK ADD WATER 20% 4 0:41 EST. TIME REMAINING 2 1 NORMAL NORMAL MEDIUM HIGH 3 1 Status/Cycle Display This portion of the display shows the selected cycle, operating status, and special messages. If a cycle has special instructions, they will also be displayed in this area. 2 Estimated Time Remaining When the START/PAUSE button is pressed, the dryer will display the estimated (SENSOR DRY) or set time (TIME DRY) remaining, and begin tumbling. NOTE: The cycle time on SENSOR DRY cycles may fluctuate as the dryer recalculates drying time for optimal results. 3 Cycle Setting Indicators These indicators show the current cycle settings for DRY LEVEL, TEMP. CONTROL, TIME DRY, and BEEPER. To change these settings, press the appropriate settings button. 4 CYCLE COMPLETION INDICATOR Shows how much of the current drying cycle has been completed. 5 FLOW SENSE™ DUCT BLOCKAGE SENSING SYSTEM INDICATOR The FLOW SENSE™ duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer. This improves operating efficiency and helps minimize service calls, 28 saving you money. 6 Child Lock Indicator When CHILD LOCK is set, the Child Lock indicator will appear and all buttons are disabled except the ON/OFF button. This prevents children from changing settings while the dryer is operating. 7 ADD WATER INDICATOR If the steam feeder is lack for water, this error may be displayed. Fill the feeder and restart the cycle. 7 LINT FILTER INDICATOR The dryer automatically detects reduced air flow caused by a full lint filter. The LINT FILTER indicator will light before each load as a reminder to check the lint filter before starting each load. If the lint filter becomes clogged during a load, the indicator will come on to let you know that the filter should be cleaned immediately for maximum efficiency. Always clean the lint filter before every cycle. 9 CYCLE OPTION INDICATOR These indicators show the cycle options for ANTI BACTERIAL, DAMP DRY BEEP, and WRINKLE CARE. For detailed information about the individual options, please see the following pages.