LG DLGX0002TM Owner's Manual - Page 41

Pedestal Installation

Page 41 highlights

OPTIONAL ACCESSORIES PEDESTAL INSTALLATION The pedestal accessory includes: • Drawer divider (1) • Wrench (1) • Screws (18) † • Retainers (4) †† † Dryer installation only uses 8 screws †† For dryer only Tools Needed for Installation: • Phillips-head screwdriver • Wrench (supplied) To ensure safe and secure installation, please thoroughly follow the instructions below. wWARNING • Incorrect installation can cause serious accidents. • The appliances are heavy. Two or more people are required when installing the pedestal. There is a risk of serious back injury or other injuries. • Do not allow children to play in or on the drawer. There is a risk of suffocation or injury. • Do not step on the handle. There is a risk of serious injury. • If appliances are already installed, disconnect them from all power, water, or gas lines and from draining or venting connections. Failure to do so can result in electrical shock, fire, explosion, or death. Retract fully Then loosen 1-1/2 turns 1 To set the dryer to the same height as the washer, fully retract the leveling feet of the dryer by turning them counterclockwise, then turn them clockwise 1-1/2 turns. NOTE: The appliance and pedestal assembly must be placed on a solid, sturdy, level floor for proper operation. T-clip Retainer 2 Insert the T-clip of the 4 retainers into the dryer base as shown. Press up on the back of the clip and pull outward to lock into place. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

OPTIONAL ACCESSORIES
w
WARNING
To ensure safe and secure installation, please
thoroughly follow the instructions below.
PEDESTAL INSTALLATION
Tools Needed for Installation:
• Phillips-head screwdriver
• Wrench (supplied)
• Incorrect installation can cause serious
accidents.
The appliances are heavy. Two or more
people are required when installing the
pedestal.
There is a risk of serious back injury
or other injuries.
• Do not allow children to play in or on the
drawer.
There is a risk of suffocation or injury.
• Do not step on the handle.
There is a risk of
serious injury.
• If appliances are already installed,
disconnect them from all power, water, or
gas lines and from draining or venting
connections.
Failure to do so can result in
electrical shock, fire, explosion, or death.
The pedestal accessory includes:
• Drawer divider (1)
• Wrench (1)
• Screws (18) †
• Retainers (4) ††
1
To set the dryer to the same height as the
washer, fully retract the leveling feet of the
dryer by turning them counterclockwise, then
turn them clockwise 1-1/2 turns.
NOTE:
The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor
for proper operation.
2
Insert the T-clip of the 4 retainers into the
dryer base as shown. Press up on the
back of the clip and pull outward to lock
into place.
Retainer
Retract fully
Then loosen
1-1/2 turns
T-clip
† Dryer installation only uses 8 screws
†† For dryer only
³1