LG GL6000ER Owners Manual - Page 15

ENGLISH ENGLISH (a) When window frame is located on inner sill. • Install a wood strip (window width long and window frame height high) on the inner sill. SASH WINDOW WINDOW FRAME WOOD STRIP INNER SILL OUTER SILL (b) When the window frame is higher than 19/32"(15mm) • Install a wood strip (about 4"(102mm) long) on the outdoor sill to raise support bracket. WINDOW FRAME WOOD STRIP 19/32"(15mm) INNER SILL OUTER SILL FIG. 9 REMOVAL FROM WINDOW • Turn off and unplug the air conditioner. • Unscrew the side screws that you installed in Step 5. 6. • Close the curtain frame and remove foam seal and L bracket from the windows. • Keep a firm grip on the air as you the sash. • Lift the air conditioner from the window and remove the foam strip from between the windows. • Remove the support bracket from window frame. NOTE: When cooling season is over, unit is removed from window for cleaning and storage. There may still be some condensation water in the basepan. Remove the unit carefully to avoid water being spilled out on floor. Always store unit flat on its base. Do not stand it on its end. Be sure to remove support bracket, L bracket, and foam seal from window and save. Window will not close if support bracket remains installed. CAUTION • Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install the unit. To prevent injury or strain, use proper lifting and carrying techniques when moving unit. • When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front and rear coils. • Make sure air conditioner does not fall during removal. 15