LG HBLG6000R Owners Manual - Page 12

of Inner Sill

Get LG HBLG6000R PDF manuals and user guides View all LG HBLG6000R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Installation Proper clearance enhances the cooling! efficiency of the unit and prevents heat radiation of the condenser. 1. If a storm window presents interference, fasten a 2" wide wood strip to the inner window sill across the full width of the sill. The wood strip should be thick enough to raise the height ,of the window sill so that the unit can b,e installed without interference by the storm window frame. 2. See Figure. B. The top of the wood strip should be, approximately 3/4" higher than the storm window frame (Storm Window Rame) or wood strip (Outdoors) to help ,condensation to drain properly t,o the outside. 3. Install a second wood strip (approximately 6" long by 11/2" wide and same thickness as first strip) in the center of the sill flush against the back off the inner sill. This will raise the L bracket as shown Figure. B. 4. If the distance between Storm Window Frame and Wood Strip Mounted on Top of Inner Sill is more than 1", two of wood strips are not necessary. Inner Si_l indoors Figure, A Figure, B 12 Room Air Conditioner

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
Installation
Proper
clearance
enhances
the cooling! efficiency
of the unit and prevents
heat
radiation
of the condenser.
1. If a storm window
presents
interference,
fasten
a 2" wide wood strip
to the inner
window
sill across
the full width of the sill. The wood
strip should
be thick
enough
to raise the height
,of the window
sill so that the unit can b,e installed
without
interference
by the storm window
frame.
2. See Figure. B. The top of the wood
strip should
be, approximately
3/4" higher
than the storm window
frame
(Storm
Window
Rame)
or wood strip (Outdoors)
to help ,condensation
to drain
properly
t,o the outside.
3. Install a second
wood strip
(approximately
6" long by 11/2" wide and same
thickness
as first strip)
in
the center
of the sill flush against
the back off the
inner sill. This will raise the L bracket
as shown
Figure. B.
4. If the distance
between
Storm Window
Frame
and Wood
Strip Mounted
on Top
of Inner Sill
is
more than
1", two of wood
strips are not necessary.
Inner Si_l
indoors
Figure,
A
Figure,
B
12
Room
Air Conditioner