LG LAB540W Owners Manual - Page 28

28 System Setting System Setting ,,Note yy This unit and the DLNA Certified Smartphone must be connected to the same network. yy To use the [Network Play] function using a DLNA certified smartphone, press HOME Resolution Sets the output resolution of the HDMI video signal. Refer to page 17 for details about the resolution setting. [Auto] ( ) to display the home menu before connecting to this unit. If the HDMI OUT jack is connected to TVs providing display information (EDID), yy While controlling the unit using the [Network Play] function, the remote control automatically selects the resolution best suited to the connected TV. may not work. yy Available file formats described on page 65 are not always supported on [Network [480p] Outputs 480 lines of progressive video. Play] function. [720p] 3 Outputs 720 lines of progressive video. [DISPLAY] menu TV Aspect Ratio Select a TV aspect ratio option according to your TV type. [4:3 Letter Box] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. [16:9 Original] Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Full] Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. [1080i] Outputs 1080 lines of interlaced video. [1080p] Outputs 1080 lines of progressive video. Ultra HD Upscaling This feature allows the unit to up-scale the original video resolution to Ultra HD resolution and output via HDMI connection. [Auto] If you connect a display capable of displaying Ultra HD resolution, this unit will output video signals in Ultra HD resolution automatically. [Off ] The unit will turn off the Up-scaling feature. ,,Note yy This unit will output video signals in Ultra HD resolution when it plays BD-ROM disc formatted in 24 Hz. yy The playback pictures may be momentarily interrupted when the resolutions switch. ,,Note You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p.