LG LAB540W Owners Manual - Page 62
Appendix, Controlling a TV with the Supplied Remote Control - release
View all LG LAB540W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
62 Appendix Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. Setting up the remote to control your TV You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Manufacturer Code number LG 1(Default), 2 Zenith 1, 3, 4 GoldStar 1, 2 By pressing 1 (TV POWER) AV/INPUT You can Turn the TV on or off. Switch the TV's input source between the TV and other input sources. Samsung 6, 7 Sony 8, 9 Hitachi 4 2. Release the 1 (TV POWER) button to complete setting. PR/CH W/S Scan up or down through memorized channels. Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries VOL +/- Adjust the volume of the TV of the remote, the code number you have set may be reset to the default setting. Set the appropriate ,,Note code number again. Depending on the unit being connected, you 6 may not be able to control your TV using some of the buttons. Appendix