LG LBNC15231V Owners Manual - Page 15

ENGLISH INSTALLATION 15 •• Insert the end of the copper tubing into the connection as far as possible. While holding the tubing, tighten the fitting. Tubing Clamp ¼ in. Tubing ¼ in. Compression Nut Ferrule (sleeve) Refrigerator Connection Turning on the Power ••After installing, plug the refrigerator's power cord into a 3-prong grounded outlet and push the refrigerator into the final position. 10 Turn the water on at the shutoff valve. Tighten any connections that leak. CAUTION CAUTION ••Check for leaks at all water line connections. Leveling The refrigerator has two front leveling legs. Adjust the legs to alter the tilt from front-to back or side-to side. If the refrigerator seems unsteady, or the doors do not close easily, adjust the refrigerator's tilt using the instructions below: 1 Turn the leveling leg to the left to raise that side of the refrigerator or to the right to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator. ••Connect to a rated power outlet. ••Have a certified electrician check the wall outlet and wiring for proper grounding. ••Do not damage or cut off the ground terminal of the power plug. Position the Refrigerator ••Arrange the refrigerator so that it does not vibrate against adjoining surfaces or against the wall. Be sure to maintain at least a 2" clearance behind the refrigerator for proper ventilation. 2 Open both doors and check to make sure that they close easily. If the doors do not close easily, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and be sure to turn both leveling legs the same amount.