LG LDCS24223B Owners Manual - Page 16

Removing the Refrigerator Door, Assembling the Refrigerator Door

Get LG LDCS24223B PDF manuals and user guides View all LG LDCS24223B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

ENGLISH 15 INSTALLATION Removing the Refrigerator Door 1 Remove the top hinge cover screws . Lift the hook (not visible), located at the bottom of the front side of the cover , with a flat-head screwdriver. Assembling the Refrigerator Door 1 Make sure that the plastic sleeve is inserted in the bottom of the door. Lower the door onto the middle hinge pin as shown in the figure. 2 Remove the three bolts using a 10mm or 13/32-inch socket wrench and lift off the top hinge. Set parts aside. 2 Line up the top hinge with the holes in the top of the refrigerator. Use the three bolts to replace the hinge. Tighten the bolts. WARNING When lifting the hinge, be careful that the door does not fall forward. 3 Replace the cover. Insert and tighten the cover screws . 3 Lift the door from the middle hinge pin and remove the door. WARNING Place the door, inside facing up, on a non-scratching surface.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
15
INSTALLATION
1
Remove the top hinge cover screws
.
Lift the hook (not visible), located at the
bottom of the front side of the cover
,
with a flat-head screwdriver.
2
Remove the three bolts using a 10mm or
13/32-inch socket wrench and lift off the
top hinge. Set parts aside.
Removing the Refrigerator Door
WARNING
When lifting the hinge, be careful that
the door does not fall forward.
3
Lift the door from the middle hinge pin and
remove the door.
WARNING
Place the door, inside facing up, on a
non-scratching surface.
1
Make sure that the plastic sleeve is
inserted in the bottom of the door. Lower
the door onto the middle hinge pin as
shown in the figure.
2
Line up the top hinge with the holes in the
top of the refrigerator. Use the three bolts
to replace the hinge. Tighten the bolts.
Assembling the Refrigerator Door
3
Replace the cover. Insert and tighten the
cover screws
.
ENGLISH