LG LDCS24223B Owners Manual - Page 34

ENGLISH 33 HOW TO USE Control Pad * Depending on the model, some of the following functions may not be available. Control Pad Features LED Display Indicator Door Control Button Refrigerator Temperature Indicates the set temperature of the refrigerator compartment in Celsius (°C) or Fahrenheit (°F). Freezer Temperature Indicates the set temperature of the freezer compartment in Celsius (°C) or Fahrenheit (°F). To change the temperature mode from °F to °C (or vice versa) press and hold the Refrigerator and Freezer temperature buttons simultaneously for approximately five seconds. The temperature indicator on the display window switches between Celsius and Fahrenheit. NOTE The displayed temperature is the target temperature, and not the actual temperature of the refrigerator. The actual refrigerator temperature depends on the food inside the refrigerator. Ice Plus This function increases both ice making and freezing capabilities. . When you press the Ice Plus button, the light will be on in the display and will continue for 24 hours. The function will automatically shut off after 24 hours. . You can stop this function manually by pressing the button one more time. Door Alarm Door . When power is connected to the refrigerator, the door alarm is initially set to ON. When you press the Door Alarm button, the light will change to OFF and the Door Alarm function will deactivate. . When either the refrigerator or the freezer door is left open for more than 60 seconds, the alarm tone will sound to let you know that the door is open. . When you close the door, the door alarm will stop. WARNING Display Mode (For Store Use Only) The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while on display in a retail store. When activated, OFF will display on the control panel and the display will remain on for 20 seconds. To deactivate / activate: With either refrigerator door opened, press and hold the Refrigerator and Ice Plus buttons at the same time for five seconds. The control panel will beep and the temperature settings will display to confirm that Display Mode is deactivated. Use the same procedure to activate the Display Mode.