LG LP1220GSR Owners Manual - Page 18

18 OPERATION 3 Temperature Control À/Á In Cool, Dry and Heat mode, the À/Á buttons adjust the set temperature up to 86 °F (30 °C) or down to 60 °F (16 °C), in one-degree increments. NOTE • To switch the temperature units on the display between Fahrenheit (°F) and Celsius (°C), press and hold the À and Á buttons on the control panel at the same time for 5 seconds. 4 Fan Speed Press repeatedly to toggle the fan speed between High and Low settings. An LED illuminates to indicate the selected fan speed. The fan speed can be changed in the Cool, Fan, and Heat modes. The fan speed is preset in the Dry mode. After pressing the button, there is a brief delay before the fan motor changes speed. NOTE • Press and hold the Fan Speed button on the control panel for 3 seconds to set Auto Swing. 5 Timer Delay ON - When the air conditioner is off, set it to automatically turn on from 1 to 24 hours later, at its previous mode and fan settings. Delay OFF - When the air conditioner is on, set it to automatically turn off from 1 to 24 hours later. NOTE • Each press of the Timer button advances the timer by 1 hour. Once you have finished setting the Delay OFF Timer, the display returns to the temperature setting after a short delay. • To cancel the Timer function, press the Timer button on control panel. 6 Auto Swing This function automatically moves the louvers to adjust the direction of the air flow. Press the Auto Swing button repeatedly to select the desired direction. NOTE • To switch the temperature units on the display between Fahrenheit (°F) and Celsius (°C), press and hold the Swing button on the remote control for 5 seconds. 7 Light Sets the display screen brightness: On → Dim → Off NOTE • Press and hold the Timer button on the control panel for 3 seconds to adjust the brightness. 8 Clean Filter The Clean Filter LED lights up to notify you that the filter needs to be cleaned. After cleaning the filter, press and hold the Mode button on the control panel for 3 seconds to turn off the Clean Filter light. NOTE • The filter reset must be done using the control panel, not the remote control. • This feature is a reminder to clean the air filter for more efficient operation. The LED light turns on after 250 hours of operation.