LG LRFDS3016S Owners Manual - Page 18

Assembling the Right Refrigerator

Get LG LRFDS3016S PDF manuals and user guides View all LG LRFDS3016S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

18 INSTALLATION CAUTION • Do not hold the handle when removing or replacing the drawer. The handle may come off, causing personal injury. 3 Lower the door into its final position and insert the screws in the rails on both sides. Assembling the Right Refrigerator Door CAUTION • Install the right-side door first. 1 Make sure that the plastic sleeve is inserted in the bottom of the door. Lower the door onto the middle hinge pin as shown in the figure. 4 Insert the drawer into the frame, and push the drawer back until it clicks into place. 2 Fit the hinge a over the hinge lever latch b and slot it into place. Rotate the lever c counterclockwise to secure the hinge. 5 Replace the ice bin in the drawer. Insert the Durabase basket in the rail assembly. 3 Connect all the wire harnesses d. Screw in the ground wire e.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
18
INSTALLATION
CAUTION
´
Do not hold the handle when removing or
replacing the drawer. The handle may come off,
causing personal injury.
3
Lower the door into its final position and
insert the screws in the rails on both sides.
4
Insert the drawer into the frame, and push
the drawer back until it clicks into place.
5
Replace the ice bin in the drawer. Insert the
Durabase basket in the rail assembly.
Assembling the Right Refrigerator
Door
CAUTION
´
Install the right-side door first.
1
Make sure that the plastic sleeve is inserted in
the bottom of the door. Lower the door onto
the middle hinge pin as shown in the figure.
2
Fit the hinge
a
over the hinge lever latch
b
and slot it into place. Rotate the lever
c
counterclockwise to secure the hinge.
3
Connect all the wire harnesses
d
. Screw in
the ground wire
e
.