LG LRGL5823D Owners Manual - Page 16
Providing Adequate Gas, Supply
View all LG LRGL5823D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 INSTALLATION Installing the Anti-tip Device Anti-tip bracket Screw must enter wood or concrete Wall plate The anti-tip bracket is packaged with an installation template. The instructions include necessary information to complete the installation. Read and follow the range installation instruction sheet. WARNING •• Range must be secured with an approved anti-tip device. •• The range could be tipped by standing, sitting or leaning on an open door if the range or anti-tip device is not properly installed. •• After installing the anti-tip device, verify that it is in place by carefully attempting to tilt the range forward. •• This range has been designed to meet all recognized industry tip standards for all normal conditions. •• The installation of the anti-tip device must meet all local codes for securing the appliance. •• The use of this device does not preclude tipping of the range when not properly installed. •• A child or adult can tip the range and be killed. •• Install the anti-tip device to the structure and/ or the range. Verify the anti-tip device has been properly installed and engaged by following the guide of the Anti tip bracket template. •• Engage the range to the anti-tip device by following the guide of the Anti tip bracket template. Ensure the anti-tip device is reengaged when the range is moved by following the guide of the Anti tip bracket template. •• Re-engage the anti-tip device if the range is moved. Do not operate the range without the anti-tip device in place and engaged. •• See installation instructions for details. •• Failure to do so can result in death or serious burns to children or adults. Providing Adequate Gas Supply The range is designed to operate at a pressure of 5" of water column on natural gas or 10" of water column on LP. Make sure you are supplying your range with the type of gas for which it is configured. This range is convertible for use on natural or LP gas. When using this range on LP gas, conversion must be made by a qualified LP installer before attempting to operate the range. For proper operation, the pressure of natural gas supplied to the regulator must be between 5" and 13" of water column. For LP gas, the pressure supplied to the regulator must be between 10" and 13" of water column. When checking for correct operation of the regulator, the inlet pressure must be at least 1" more than the operating (manifold) pressure as given above. The pressure regulator located at the inlet of the range must remain in the supply line regardless of which type of gas is being used. A flexible metal appliance connector used to connect the range to the gas supply line should have an I.D. of 5/8" and a maximum length of 5 feet. In Canada, flexible connectors must be single wall metal connectors less than 6 feet in length.