LG LSSE3027ST Owners Manual - Page 18
Engaging the Anti-tip Device, Optional Rear Filler
View all LG LSSE3027ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 INSTALLATION Engaging the Anti-tip Device •• Move the range close enough to the opening to plug into the receptacle. •• Slide the range into position ensuring that the back leg slides under the anti-tip bracket. The range should sit flush against the back wall when properly installed. •• Carefully attempt to tip the range forward to ensure that the anti-tip bracket is engaged properly. If properly installed, the anti-tip bracket will prevent the range from being tipped. If the range can be tipped, reinstall the range until the anti-tip bracket is properly installed and the range will not tip forward. •• Turn on electrical power. Check the range for proper operation. Optional Rear Filler If the counter does not bridge the opening at the rear wall the rear filler kit, that is provided with the slide in range, will be needed. NOTE If the countertop depth is greater than 25" there will be a gap between the filler kit and the back wall. If the countertop depth is less than 24", the control panel will not sit flush with the countertop. Installing the Rear Filler 1 Using a screwdriver, remove the three screws holding the rear bracket in place. Rear bracket 2 Attach the rear bracket and filler assembly as shown, using the three screws removed in step 1. Rear filler