LG LSSE3027ST Owners Manual - Page 19
Test Run
View all LG LSSE3027ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Test Run Check if the range is properly installed and run a test cycle. 1 Turn the oven mode knob to the Off position to start test. 2 Turn each knob to the Hi position to check that the surface heating elements are working properly. The elements should glow red and radiate heat, and they should cycle on and off periodically even when the knob is in the Hi position. This cycling prevents the glass-ceramic from being cracked by thermal shock. IMPORTANT : The Warming Zone does not consume enough power to glow red. 3 After checking all the surface heating elements, check the locking system by pressing Probe for three seconds. The oven door should lock and the cooktop should not operate while the Lockout function is turned on. Pressing Probe for three seconds to disable Lockout. 4 Now check the oven's operation. Turn the oven mode knob to select the Bake mode. 350 °F appears in the display. Press Start. 5 The oven should finish preheating in 15 minutes, and the convection fan should operate while the oven is preheating. 6 After checking the oven's operation, turn the temperature up to 450 °F and leave the oven on for at least an hour to help remove any oil which might cause smoke and odors when first using the oven. NOTE Smoke may come out of the range when it is first used. INSTALLATION 19 ENGLISH