LG LW6019ER Owners Manual - Page 19

Window vibration - poor

Page 19 highlights

ENGLISH TROUBLESHOOTING 19 Problem Water drips indoors. Water collects in base pan. Possible Cause The air conditioner is not tilted to the outside. Moisture removed from air and drains into base pan. Solutions For proper water disposal, make sure the air conditioner slants slightly from the cabinet front to the rear. This is normal for a short period in areas with little humidity; normal for a longer period in very humid areas. Air conditioner turns on and off rapidly. Outside temperature extremely hot. Noise when unit is cooling. Air movement sound. Window vibration - poor installation. Remote sensing deactivating prematurely. Remote control not located within range. Remote control signal obstructed. Refer to installation instructions or check with installer. This is normal. If too loud, set to lower FAN setting. Refer to installation instructions or check with installer. Place remote control within 20 feet & 120° radius of the front of the unit. Remove obstruction. Room too cold. Set temperature too low. Increase set temperature. NOTE ● You can refer to the Energy Star program in detail at www.energystar.gov. ● If you see "CH" in the display, please call 1-800-243-0000.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

ENGLISH
19
TROUBLESHOOTING
Problem
Possible Cause
Solutions
Water drips
indoors.
The air conditioner is not tilted to
the outside.
For proper water disposal, make
sure the air conditioner slants
slightly from the cabinet front to the
rear.
Water collects in
base pan.
Moisture removed from air and
drains into base pan.
This is normal for a short period in
areas with little humidity; normal for
a longer period in very humid areas.
Air conditioner
turns on and off
rapidly.
Outside temperature extremely
hot.
Refer to installation instructions or
check with installer.
Noise when unit is
cooling.
Air movement sound.
This is normal. If too loud, set to
lower FAN setting.
Window vibration - poor
installation.
Refer to installation instructions or
check with installer.
Remote sensing
deactivating
prematurely.
Remote control not located
within range.
Place remote control within 20 feet
& 120° radius of the front of the
unit.
Remote control signal
obstructed.
Remove obstruction.
Room too cold.
Set temperature too low.
Increase set temperature.
NOTE
You can refer to the Energy Star program in detail at www.energystar.gov.
If you see "CH" in the display, please call 1-800-243-0000.