LG MU-50PZ90V Owners Manual - Page 30
Picture Size Setting for Twin Picture mode
View all LG MU-50PZ90V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
External Control Device Setup 25. PIP Input Select (Command2:y) G To select input source for sub picture in PIP mode. Transmission [k][y][ ][Set ID][ ][Data][Cr] Data 0: RGB 2: Video 1: Component 3: S-video 4: DVI Acknowledgement [y][ ][Set ID][ ][OK][Data][x] 26. Abnormal State (Command2:z) G To recognize an abnormal state. Transmission [k][z][ ][Set ID][ ][FF][Cr] Data FF:Read Acknowledgement [z][ ][Set ID][ ][OK][Data][x] Data 0: Normal (Power on and signal exist) 1: No signal (Power on) 2: Turn the monitor off by remote control 3: Turn the monitor off by sleep time function 4: Turn the monitor off by RS-232C function 5: 5V down 6: AC down 7: Turn the monitor off by Fan Alarm function 8: Turn the monitor off by off time function 9: Turn the monitor off by auto off function a: Turn the monitor off by AV board detect 27. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 0: Normal 1: White wash Acknowledgement 2: Orbiter 3: Inversion [p][ ][Set ID][ ][OK][Data][x] 28. Low Power (Command2:q) G To control the low power function on/off. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data 0: Low power off 1: Low power on Acknowledgement [q][ ][Set ID][ ][OK][Data][x] 30 Plasma Monitor 29. Orbiter Time Setting (Command2:r) G To adjust orbiter operation time term. Transmission [j][r][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: FE Acknowledgement [r][ ][Set ID][ ][OK][Data][x] 30. Orbiter Pixel Setting (Command2:s) G To adjust pixel number in orbiter function. Transmission [j][s][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 9 Acknowledgement [s][ ][Set ID][ ][OK][Data][x] 31. Picture Size Setting for Twin Picture mode (Command2:t) G To adjust main picture size in twin picture mode. Transmission [j][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 • Refer to 'Real data mapping1'. See page 27. Acknowledgement [t][ ][Set ID][ ][OK][Data][x] 32. Auto Configure (Command2:u) G To adjust picture position and minimize image shaking automatically. Auto Configure only works in RGB-PC mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Acknowledgement [u][ ][Set ID][ ][OK][Data][x]