LG RCS511A Service Manual - Page 15

User Options Follow the instructions below to customized the microwave ovenÕs operation. End-of-cycle signal, maximum heating time and other options can be changed to meeting your cooking needs. 1. Open oven door. ¥ If door is closed or STOP/RESET pad is pressed before finishing programming sequence, oven exits programming mode. 2. Press and hold pad 2 for approximately 5 seconds. ¥ After 5 seconds, signal sounds. Display shows ÒOPTIONÓ. 3. Press number pad that matches desired option. ¥ ÒOPÓ represents optional program mode, first number represents option number and second number represents functions currently selected for option. 4. Press START pad to advance to next option. See table for options. 5. Press number pad (0,1-3) to change option. 6. Press START pad to save changes. ¥ Repeat steps 4-6 to change additional options. 7. Press STOP/RESET pad or close oven door to exit programming mode. Optional Program Indicator Pad Option Number Selected Numbered Pads 1 End of Cycle Beep 2 Speaker Volume 3 Key Beep 4 Keyboard Enable Window 5 Add Time During Heating 6 Reset Door Open 7 (some models) Maximum Heating Time 8 Manual Operation 9 (some models) Double Digit Operation 0 Clean Filter Message Display OP:10 OP:11 OP:12 OP:20 OP:21 OP: 22 OP:23 OP:30 OP:31 OP:40 OP:41 OP:42 OP:43 OP:50 OP:51 OP:60 OP:61 OP:70 OP:71 OP:80 OP:81 OP:90 OP:91 OP:00 OP: 01 OP:02 OP:03 Options (Factory Settings in Bold) 3 second beep. Continuous beep until door is opened. 5 beep bursts until door is opened. Eliminates beep. Sets volume to low. Sets volume to medium. Sets volume to high. Prevents beep when pad is pressed. Allows beep when pad is pressed. 15 seconds after oven door is opened, keyboard disabled. 30 seconds after oven door is opened, keyboard disabled. 1 minute after oven door is opened, keyboard disabled. 2 minutes after oven door is opened, keyboard disabled. Prevents adding heating time while oven is heating. Allows heating time to be changed while oven is heating when a memory pad is pressed. Allows oven to resume heating time countdown after door is opened during cycle. Cancels heating time count down after door is opened during cycle. Allows 60 minutes of heating time (some models). Allows 10 minutes of heating time. Allows use of preprogrammed pads only. Allows use of manual time entry and preprogrammed pads. Allows 10 (0-9) preprogrammed pads. Allows 100 (00-99) preprogrammed pads. Do not display message. Display messag e for 24 hours every 7 days. Display message for 24 hours every 30 days. Display message for 24 hours every 90 days. 4-9