LG RU-42PX11 Owners Manual - Page 38
Picture Size Setting for Double Window
View all LG RU-42PX11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
External Control Device Setup 26. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 0: Normal 1: White wash Acknowledgement 2: Orbiter 3: Inversion [p][ ][Set ID][ ][OK][Data][x] 27. Low Power (Command2:q) G To control the low power function on/off. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data 0: Low power off 1: Low power on Acknowledgement [q][ ][Set ID][ ][OK][Data][x] 28. Orbiter Time Setting (Command2:r) G To adjust orbiter operation time term. Transmission [j][r][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: FE Acknowledgement [r][ ][Set ID][ ][OK][Data][x] 29. Orbiter Pixel Setting (Command2:s) G To adjust pixel number in orbiter function. Transmission [j][s][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: 9 Acknowledgement [s][ ][Set ID][ ][OK][Data][x] 30. Picture Size Setting for Double Window mode (Command2:t) G To adjust main window size in Double Window mode. Transmission [j][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 14 • Refer to 'Real data mapping1'. See page 35. Acknowledgement [t][ ][Set ID][ ][OK][Data][x] 38 Plasma TV 31. Auto Configure (Command2:u) G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Acknowledgement [u][ ][Set ID][ ][OK][Data][x] 32. Tune command (Command: m a) G Tune channel to following physical number Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][Cr] Data 0: Air: 02 ~ 45, Cable: 01, 0E ~ 7D 1: 0 2: 0 3: High → Main Channel: 0, Sub Channel: 1 Low → Air: 0, CATV: 1 Acknowledgement [a][ ][Set ID][ ][OK][Data0][ ][Data1][ ][Data2][ ][Data3][x] 33. Channel Add/Del (Command: m b) G To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 0: Channel Memory 1: Channel Erase Acknowledgement [b][ ][Set ID][ ][OK][Data][x] 34. Key (Command: m c) G To send IR remote key code Transmission [m][c][ ][Set ID][ ][Data][ ][Cr] Data Key code: Refer to page 40. Acknowledgement [c][ ][Set ID][ ][OK][Data][x]