LG WM2032HS Service Manual - Page 32
Spin Trouble - problems
View all LG WM2032HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
SPIN TROUBLE Check during spin if the frequency of the water level is 248 or more. Press the START /PAUSE button 2 times in QC Test mode, is the drum spinning at low speed? Check the SENSOR SWITCH ASSEMBLY or HOSE (Pressure). If the problem is on the SENSOR SWITCH ASSEMBLY or the HOSE, replace the SENSOR SWITCH ASSEMBLY or the HOSE. Normal Is it disconnected, or disassembled? [Red:3pin (1), NA:4pin (2)] Check the motor connector, Is the resistance of the terminal the same as the figure? MOTOR TERMINAL ¥N ¥M ¥L Resistance of terminal: ¥L-¥M / ¥M-¥N / ¥N-¥L About 5Ω 15Ω Correct the connection. Replace the STATOR ASSEMBLY Replace the MAIN PWB ASSEMBLY Does the spring of Latch Hook actuate? Is there clicking sound once or twice when the START/PAUSE button is pressed to start the cycle? Is DOOR SWITCH ASSEMBLY broken? 31 Replace Door Assembly. Check the DOOR SWITCH ASSEMBLY Connector and MAIN PWB ASSEMBLY (Red 4 pin and white 4 pin connector (1)). Replace the DOOR SWITCH ASSEMBLY.