LG WT7060CW Owners Manual - Page 23
Cleaning the Water Inlet, Filters
View all LG WT7060CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Cleaning the Bleach Dispenser Bleach may build up on the bleach dispenser cover. Check for buildup and clean the cover once or twice a month. Type 1 Remove the cover from the bleach dispenser. Clean the cover and the opening with warm water. Type 2 The cover cannot be separated from the dispenser. Clean the cover using a brush and warm water. MAINTENANCE 23 Cleaning the Water Inlet Filters If the washer does not fill properly, an error message will show on the display. The inlet valve filter screens could be plugged by hard water scale, sediment in the water supply, or other debris. CAUTION The inlet screens protect the delicate parts of the inlet valve from being damaged by particles that could enter the valves with the water supply. Operating the washer with these filters removed could cause a valve to stick open resulting in flooding and/or property damage. Do not use the washer without the inlet filters. If you use the washer without the inlet filters it will cause leaks and malfunction. If you use the washer in an area with hard water, the inlet filter may clog due to lime buildup. 1 Turn off both water faucets completely. 2 Unscrew the hot and cold water hoses from the back of the washer. 3 Carefully remove the filters from the water valves. 4 Remove foreign objects and soak the filters in white vinegar or a lime scale remover. If using a lime scale remover, follow the manufacturer's instructions. Be careful not to damage the filters while cleaning them. 5 Rinse filters thoroughly and press them back into place. 6 Flush then reattach the water hoses. Before reattaching the hoses, flush the hoses and water lines by running several gallons of water into a bucket or drain, preferably with the faucets wide open for maximum flow. NOTE An message may blink on the display when the water pressure is low or an inlet filter is clogged with dirt. Clean the inlet filter. ENGLISH