LG XBS341 Operation Guide - Page 12

Connections Continued, Basic TV Connections

Page 12 highlights

Connections (Continued) Basic TV Connections Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the ANTENNA/CABLE OUT jack on the DVD+Hi-Fi VCR to the ANTENNA in jack on the TV using the 75-ohm Coaxial Cable supplied (R). ote If you use this connection, tune the TV to the DVD+HiFi VCR's RF output channel (CH 3 or 4). Progressive Scan (ColorStream® pro) connection If your television is a high-definition or "digital ready" television, you may take advantage of the DVD+Hi-Fi VCR's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD+Hi-Fi VCR. Connect the COMPONENT VIDEO OUT jacks on the DVD+Hi-Fi VCR to the corresponding IN jacks on the TV using an optional Y Pb Pr cable (C). How to set the DVD+Hi-Fi VCR's RF output channel 1. While the DVD+Hi-Fi VCR is turned off, press and hold TUNING (v/V) on the front panel for about five seconds. The unit will turn itself on and "RF-03" or "RF-04" appears in the display window. 2. Use TUNING (v/V) on the front panel to change the RF output channel (CH 03 or CH 04). 3. Turn the DVD+Hi-Fi VCR off and then on. 4. Select the TV's CH to 3 or 4 depending on the RF output channel you had selected. Now you can watch the DVD+Hi-Fi VCR playback on CH3 or CH4 of your TV. ote - Set the Progressive option to "On" in the Setup menu for a progressive signal, see page 20. Rear of TV ANTENNA INPUT S-VIDEO INPUT AUDIO INPUT L R VIDEO INPUT COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y Pb Pr Video connection R Connect the MONITOR OUT jack on the DVD+Hi-Fi VCR to the VIDEO IN jack on the TV using the video cable supplied (V). S C V otes If you use this connection, set the TV's source selector to VIDEO. S-Video connection Connect the S-VIDEO OUT jack on the DVD+Hi-Fi VCR to the S-VIDEO IN jack on the TV using the optional SVideo cable (S). AM GND FM ANTENNA FRONT REAR CENTER REAR FRONT SUB WOOFER (R 4 ) (R 4 ) ( 4 ) (L 4 ) (L 4 ) ( 8 ) S-VIDEO OUT SPEAKERS IN OUT ANTENNA/CABLE VIDEO 1 MONITOR COMPONENT OUT VIDEO OUT VIDEO Y L Pb AUDIO R Pr Component Video (Color Stream®) connection Connect the COMPONENT VIDEO OUT jacks on the DVD+Hi-Fi VCR to the corresponding IN jacks on the TV using a Y Pb Pr cable (C). Rear of DVD+Hi-Fi VCR 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

12
Connections (Continued)
Basic TV Connections
±
Make one of the following connections, depending on
the capabilities of your existing equipment.
RF coaxial connection
Connect the ANTENNA/CABLE OUT jack on the
DVD+Hi-Fi VCR to the ANTENNA in jack on the TV
using the 75-ohm Coaxial Cable supplied
(R)
.
ote
If you use this connection, tune the TV to the DVD+Hi-
Fi VCR’s RF output channel (CH 3 or 4).
How to set the DVD+Hi-Fi VCR’s RF output channel
1.
While the DVD+Hi-Fi VCR is turned off,
press and hold
TUNING (
v
/
V
) on the front panel for about five
seconds.
The unit will turn itself on and “RF-03” or “RF-04” appears in
the display window.
2.
Use TUNING (
v
/
V
) on the front panel to change the
RF output channel (CH 03 or CH 04).
3.
Turn the DVD+Hi-Fi VCR off and then on.
4.
Select the TV’s CH to 3 or 4 depending on the RF
output channel you had selected.
Now you can watch the DVD+Hi-Fi VCR playback on
CH3 or CH4 of your TV.
Video connection
Connect the MONITOR OUT jack on the DVD+Hi-Fi
VCR to the VIDEO IN jack on the TV using the video
cable supplied
(V)
.
otes
±
If you use this connection, set the TV’s source selector to
VIDEO.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD+Hi-Fi VCR
to the S-VIDEO IN jack on the TV using the optional S-
Video cable
(S)
.
Component Video (Color Stream
®
) connection
Connect the COMPONENT VIDEO OUT jacks on the
DVD+Hi-Fi VCR to the corresponding IN jacks on the
TV using a Y Pb Pr cable
(C)
.
Progressive Scan (ColorStream
®
pro) connection
±
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD+Hi-Fi
VCR’s progressive scan output for the highest video
resolution possible.
±
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD+Hi-Fi VCR.
Connect the COMPONENT VIDEO OUT jacks on the
DVD+Hi-Fi VCR to the corresponding IN jacks on the
TV using an optional Y Pb Pr cable
(C)
.
ote
– Set the Progressive option to “On” in the Setup menu
for a progressive signal, see page 20.
ANTENNA
FM
GND
AM
S-VIDEO OUT
IN
OUT
ANTENNA/CABLE
SPEAKERS
FRONT
(R 4
)
(R 4
)
REAR
CENTER
( 4
)
REAR
(L 4
)
FRONT
(L 4
)
SUB
WOOFER
( 8
)
VIDEO
MONITOR
COMPONENT
VIDEO OUT
OUT
VIDEO
Y
Pb
Pr
AUDIO
1
L
R
L
R
AUDIO INPUT
VIDEO
INPUT
ANTENNA
INPUT
V
S
R
Rear of TV
Rear of DVD+Hi-Fi VCR
S-VIDEO
INPUT
Y
Pb
Pr
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
C