LG Z37LC6D Owner's Manual - Page 78

APPENDIX PROGRAMMING THE REMOTE CONTROL I This feature is not available for all models. The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button. If the device is turned off and it responds properly the remote control need not be pro- grammed. If not, the remote should be programmed to operate the device. The programming procedures are explained below. 2 Press the MENU and MUTE button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2. 3 Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful. 4 Press the MENU button to store the code. After blinking twice, this code is stored. 5 Test the remote control functions to see if the device responds properly. If not, steps 2-5. TV POWER DVD STB VCR RETURN MENU INPUT ENTER BRIGHT - TIMER BRIGHT + FAV VOL MUTE P CH A G E 123 456 789 0 FLASHBK ADJUST RATIO PICTURE SOUND SAP CC APPENDIX 76