Lenovo 28473ZU Hardware Maintenance Manual - Page 82
Palm rest assembly with cables, for a palm rest with or without a fingerprint reader.
View all Lenovo 28473ZU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
1110 Palm rest assembly with cables For access, remove these FRUs in order: • "1010 Battery pack" on page 61 • "1030 Optical drive or travel cover" on page 64 Note: In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint reader has any defects, you can replace it by the procedures given in this section, which are the same for a palm rest with or without a fingerprint reader. Removal steps of palm rest assembly with cables 2 1 1 2 2 2 2 2 2 Step 1 2 Screw (quantity) M2 × 8 mm, wafer-head, nylon-coated (1) M2 × 5 mm, wafer-head, nylon-coated (6) Color Black Black Torque 0.181 Nm (1.85 kgfcm) 0.181 Nm (1.85 kgfcm) 76 Hardware Maintenance Manual
1110 Palm rest assembly with cables
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 61
•
“1030 Optical drive or travel cover” on page 64
Note:
In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint
reader has any defects, you can replace it by the procedures given in this section, which are the same
for a palm rest with or without a fingerprint reader.
Removal steps of palm rest assembly with cables
2
2
2
2
2
1
1
2
2
Step
Screw (quantity)
Color
Torque
1
M2 × 8 mm, wafer-head, nylon-coated (1)
Black
0.181 Nm
(1.85 kgfcm)
2
M2 × 5 mm, wafer-head, nylon-coated (6)
Black
0.181 Nm
(1.85 kgfcm)
76
Hardware Maintenance Manual