Lenovo 81413NU User Manual - Page 34
Lenovo 81413NU - ThinkCentre M51 - 8141 Manual
UPC - 882861140909
View all Lenovo 81413NU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4. Remove the metal shield from the drive bay by inserting a flat-blade screwdriver into one of the slots and gently prying it loose. 5. If you are installing any type of drive other than a serial ATA hard disk drive, make sure the drive that you are installing is set correctly as either a master or a slave device. Note: A serial ATA hard disk drive does not need to be set as either a master or a slave device. v If it is the first optical drive, set it as a master device. v If it is an additional optical drive, set it as a slave device. v If it is an additional parallel ATA hard disk drive, set it as a slave device. Refer to the documentation that comes with your drive for master/slave jumper information. 6. For a 5.25-inch drive, install a retainer bracket on the side of the drive. 7. For a 3.5-inch drive, install the drive into the Universal Adapter Bracket, 5.25 to 3.5-inch. 18 User Guide