Lenovo H520 Lenovo H520s Hardware Maintenance Manual - Page 46
from the system board, press then slide the small handle out, to spring it up.
View all Lenovo H520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Step 6. Remove the heat-sink. Refer to "Replacing the heat-sink". Step 7. To remove the microprocessor 3 from the system board, press then slide the small handle out to spring it up. 1 and open the retainer. 2 Attention: Do not touch the gold contacts on the bottom of the microprocessor. When handing the microprocessor, touch only the sides. Note: Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 40 Lenovo H520sHardware Maintenance Manual
Step 6.
Remove the heat-sink. Refer to “Replacing the heat-sink”.
Step 7.
To remove the microprocessor
3
from the system board, press then slide the small handle out
to spring it up.
1
and open the retainer.
2
Attention:
Do not touch the gold contacts on the bottom of the microprocessor. When handing the
microprocessor, touch only the sides.
Note:
Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must
be kept as clean as possible.
40
Lenovo H520sHardware Maintenance Manual