Lenovo IdeaPad S500 Touch Hardware Maintenance Manual - IdeaPad S500, S500 Tou - Page 47

Fan assembly and Heat Sink assembly, Remove two screws

Get Lenovo IdeaPad S500 Touch PDF manuals and user guides View all Lenovo IdeaPad S500 Touch manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Lenovo IdeaPad S500/S500 Touch 1060 Fan assembly and Heat Sink assembly For access, remove these FRUs in order: • "1010 Keyboard" on page 34 • "1020 Battery pack" on page 36 Figure 6. Removal steps of fan assembly and heat sink assembly Unplug the fan connector in the direction shown by arrow a, detach the system board and power board connector in the direction shown by arrows b c. a b c When installing: Make sure that the fan connector is attached firmly to the system board. Remove two screws d , loosen six screws e . ed e ee e d e Step b Screw (quantity) M2 × 3 mm, flat-head, nylok-coated (6) M2 × 4 mm, flat-head, nylok-coated (2) Color Black Black Torque 1.7 ~ 2.0 kgfcm 1.7 ~ 2.0 kgfcm 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Lenovo IdeaPad S500/S500 Touch
43
1060 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
•
“1010 Keyboard” on page 34
•
“1020 Battery pack” on page 36
Figure 6. Removal steps of fan assembly and heat sink assembly
Unplug the fan connector in the direction shown by arrow
, detach the system
board and power board connector in the direction shown by arrows
When installing:
Make sure that the fan connector is attached firmly to the
system board.
Remove two screws
, loosen six screws
.
Step
Screw (quantity)
Color
Torque
M2 × 3 mm, flat-head, nylok-coated (6)
M2 × 4 mm, flat-head, nylok-coated (2)
Black
Black
1.7 ~ 2.0 kgfcm
1.7 ~ 2.0 kgfcm
a
b
c
a
c
b
d
e
e
e
e
d
e
e
d
e
b