Lenovo IdeaPad S500 Touch Hardware Maintenance Manual - IdeaPad S500, S500 Tou - Page 55

Speakers, base cover, USB board, power assembly and power board continued

Get Lenovo IdeaPad S500 Touch PDF manuals and user guides View all Lenovo IdeaPad S500 Touch manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Lenovo IdeaPad S500/S500 Touch Figure 9. Speakers, base cover, USB board, power assembly and power board (continued) Remove two screws d, and then remove the USB board in the direction shown by arrow e. d d e Step Screw (quantity) a M2 × 4 mm, flat-head, nylok-coated (2) Color Black Torque 1.7 ~ 2.0 kgfcm When installing: When attaching the USB board to the base cover, adjust the placement of the USB and headphone jacks as shown , and make sure that both of the USB and the headphone jacks are attached to the holes on the base cover as shown. Improper placement of the jacks might cause a damage. Detach the system board connector to lift the power board in the direction shown by arrow f . f 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Lenovo IdeaPad S500/S500 Touch
51
Figure 9. Speakers, base cover, USB board, power assembly and power board (continued)
Remove two screws
, and then remove the USB board in the direction shown
by arrow
When installing:
When attaching the USB board to the base cover, adjust the
placement of the USB and headphone jacks as shown , and make sure that both
of the USB and the headphone jacks are attached to the holes on the base cover
as shown. Improper placement of the jacks might cause a damage.
Detach the system board connector to lift the power board in the direction shown
by arrow
.
Step
Screw (quantity)
Color
Torque
M2 × 4 mm, flat-head, nylok-coated (2)
Black
1.7 ~ 2.0 kgfcm
d
e
e
d
d
a
f
f